Matches in climatepub4-kg for { <https://gcmd.earthdata.nasa.gov/kms/concept/7b6e3162-1314-4441-b33a-e2b68ae85bcd> ?p ?o ?g. }
Showing items 1 to 5 of
5
with 100 items per page.
- 7b6e3162-1314-4441-b33a-e2b68ae85bcd type Concept @default.
- 7b6e3162-1314-4441-b33a-e2b68ae85bcd broader 92ddaaca-40b2-4936-bc1a-28cc5743e8b8 @default.
- 7b6e3162-1314-4441-b33a-e2b68ae85bcd definition "Path = ['Radar Altimeters', 'Altimeters', 'Active Remote Sensing', 'Earth Remote Sensing Instruments', 'Instruments'] SRAL is a redundant dual-frequency (C-band + Ku-band) nadir-looking altimeter instrument, and the core instrument of the topographic payload. The overall objectives are to provide altimetric data (basic measurements of surface heights, sea wave heights and sea wind speed) relative to a precise reference frame. SRAL has a strong heritage of the instrument techniques implemented for the Poseidon-3 altimeter on Jason-2 (launch June 20, 2008), SIRAL (SAR Interferometer Radar Altimeter) on CryoSat-2 (launch April 8, 2010), and AltiKa (Altimeter in Ka-band) on the SARAL mission of ISRO and CNES (launch 2012). The SRAL instrument is being developed at TAS (Thales Alenia Space) of Toulouse, France. The SRAL radar uses a linearly frequency-modulated pulse (chirp) and the pulse compression is carried out on-board by means of the deramp technique. The main frequency used for surface height measurements is the Ku-band (13.575 GHz, bandwidth=350 MHz), whereas the C-band frequency (5.41 GHz, bandwidth=320 MHz) is used for the ionospheric corrections. The frequency plan is compliant with the ITU (International Telecommunication Union) regulations. A 50 ms pulse duration for both frequencies has been sized as a trade-off result between a high BT product and the timing constraints of the burst pattern of the SAR mode. The SRAL altimeter instrument is made of one nadir looking antenna subsystem which is externally mounted on the satellite +Zs panel and central electronic chains composed each of a DPU (Digital Processing Unit) and a RFU (Radio Frequency Unit). The central electronic chains are mounted inside the satellite on the -YS panel and are treated according to a cold redundancy scheme. The SRAL instrument includes measurement modes, calibration modes and support modes. The measurement modes are composed of two radar modes associated to two tracking modes. The two radar modes are the following: • LRM (Low Resolution Mode). It refers to the conventional altimeter pulse-limited resolution mode (so far, the LRM mode is being used on all altimetry missions). It consists of regular emission/reception sequences at a fixed PRF (Pulse Repetition Frequency) of around 1920 Hz leading to an ambiguity rank of 10. • SARM (SAR Mode): This is a high along-track resolution mode composed of bursts of Ku-band pulses. These modes are associated to two tracking modes which consist of the following: - Closed-loop mode: refers autonomous positioning of the range window (ensures autonomous tracking of the range and gain by means of tracking loop devices implemented in the instrument). - Open-loop mode: refers to the positioning of the range window based on a-priori knowledge of the terrain height from existing high-resolution global digital elevation models. The open-loop is intended to be used instead of the more conventional closed-loop tracking over some surfaces, to improve the acquisitions over inhomogeneous or rough topography. While in open-loop, the setting of the tracking window of the altimeter is driven by predetermined commands, stored on board, combined with real-time navigation information available from the GNSS receiver. The main advantage is that the measurements are continuous, avoiding the data gaps typical of closed-loop tracking, which has problems in tracking the rapid topographic changes at coastal margins and in mountainous regions. Surface type Instrument operation Mode Tracking Open ocean LRM Closed-loop Coastal ocean SARM Open-loop Sea ice SARM Closed-loop Ice sheet interiors LRM Closed-loop Ice sheet margins SARM Open-loop Rivers/lakes SARM Open-loop" @default.
- 7b6e3162-1314-4441-b33a-e2b68ae85bcd inScheme concept_scheme @default.
- 7b6e3162-1314-4441-b33a-e2b68ae85bcd prefLabel "Sentinel_3_SRAL" @default.