Matches in SemOpenAlex for { <https://semopenalex.org/work/W159705655> ?p ?o ?g. }
Showing items 1 to 100 of
100
with 100 items per page.
- W159705655 endingPage "197" @default.
- W159705655 startingPage "189" @default.
- W159705655 abstract "This study presents analytical and experimental results of cutting force and chip-tool interface temperature developed during turning of AISI 304 austenitic stainless steels using nano-crystalline AlTiCrN coated cemented carbide insert. The work-tool thermocouple calibration set-up based on the novel concept was developed. Inconel air heater of 1 KW capacity was used as a heating element at the work-tool junction for heating the junction steadily up to 1000 °C. The turning tests were conducted at cutting speeds in the range of 140 to 320 m/min, feed in the range of 0.08 to 0.26 mm/rev keeping depth of cut constant at 1 mm. The influence of cutting parameters and tool coating were investigated on the average chip-tool interface temperature and cutting force. A regression model for chip-tool interface temperature was developed considering the effect of cutting parameters. In addition, the experimental results were validated using the 'Boothroyd temperature model'. Experimentally an interface temperature of 979°C was observed whereas the model predicted 988°C temperature at 260 m/min cutting speed and 0.14 mm/rev feed. The interface temperature in turning is strongly dependent on the cutting speed followed by feed. The AlTiCrN coated shows excellent thermal stability due to the formation of stable Cr2O3 or and dense α(Al,Cr)2O3 mixed oxide scales. The developed interface model shows excellent fit and could be used effectively for predicting the interface temperature for the given tool and work material and cutting conditions." @default.
- W159705655 created "2016-06-24" @default.
- W159705655 creator A5014533497 @default.
- W159705655 creator A5032385896 @default.
- W159705655 creator A5036724075 @default.
- W159705655 creator A5063902333 @default.
- W159705655 date "2013-01-31" @default.
- W159705655 modified "2023-09-24" @default.
- W159705655 title "Analytical and Experimental Investigation on Cutting Temperature in Turning AISI 304 Austenitic Stainless Steel Using AlTiCrN Coated Carbide Insert" @default.
- W159705655 doi "https://doi.org/10.15866/ireme.v7i1.3716" @default.
- W159705655 hasPublicationYear "2013" @default.
- W159705655 type Work @default.
- W159705655 sameAs 159705655 @default.
- W159705655 citedByCount "0" @default.
- W159705655 crossrefType "journal-article" @default.
- W159705655 hasAuthorship W159705655A5014533497 @default.
- W159705655 hasAuthorship W159705655A5032385896 @default.
- W159705655 hasAuthorship W159705655A5036724075 @default.
- W159705655 hasAuthorship W159705655A5063902333 @default.
- W159705655 hasConcept C105795698 @default.
- W159705655 hasConcept C121332964 @default.
- W159705655 hasConcept C127413603 @default.
- W159705655 hasConcept C159985019 @default.
- W159705655 hasConcept C165005293 @default.
- W159705655 hasConcept C165838908 @default.
- W159705655 hasConcept C168068576 @default.
- W159705655 hasConcept C18762648 @default.
- W159705655 hasConcept C191897082 @default.
- W159705655 hasConcept C192562407 @default.
- W159705655 hasConcept C20625102 @default.
- W159705655 hasConcept C2778703219 @default.
- W159705655 hasConcept C2779229422 @default.
- W159705655 hasConcept C2779851234 @default.
- W159705655 hasConcept C2780026712 @default.
- W159705655 hasConcept C2780098074 @default.
- W159705655 hasConcept C2781448156 @default.
- W159705655 hasConcept C33923547 @default.
- W159705655 hasConcept C39353612 @default.
- W159705655 hasConcept C41008148 @default.
- W159705655 hasConcept C5335593 @default.
- W159705655 hasConcept C72293138 @default.
- W159705655 hasConcept C76155785 @default.
- W159705655 hasConcept C78519656 @default.
- W159705655 hasConcept C97355855 @default.
- W159705655 hasConceptScore W159705655C105795698 @default.
- W159705655 hasConceptScore W159705655C121332964 @default.
- W159705655 hasConceptScore W159705655C127413603 @default.
- W159705655 hasConceptScore W159705655C159985019 @default.
- W159705655 hasConceptScore W159705655C165005293 @default.
- W159705655 hasConceptScore W159705655C165838908 @default.
- W159705655 hasConceptScore W159705655C168068576 @default.
- W159705655 hasConceptScore W159705655C18762648 @default.
- W159705655 hasConceptScore W159705655C191897082 @default.
- W159705655 hasConceptScore W159705655C192562407 @default.
- W159705655 hasConceptScore W159705655C20625102 @default.
- W159705655 hasConceptScore W159705655C2778703219 @default.
- W159705655 hasConceptScore W159705655C2779229422 @default.
- W159705655 hasConceptScore W159705655C2779851234 @default.
- W159705655 hasConceptScore W159705655C2780026712 @default.
- W159705655 hasConceptScore W159705655C2780098074 @default.
- W159705655 hasConceptScore W159705655C2781448156 @default.
- W159705655 hasConceptScore W159705655C33923547 @default.
- W159705655 hasConceptScore W159705655C39353612 @default.
- W159705655 hasConceptScore W159705655C41008148 @default.
- W159705655 hasConceptScore W159705655C5335593 @default.
- W159705655 hasConceptScore W159705655C72293138 @default.
- W159705655 hasConceptScore W159705655C76155785 @default.
- W159705655 hasConceptScore W159705655C78519656 @default.
- W159705655 hasConceptScore W159705655C97355855 @default.
- W159705655 hasIssue "1" @default.
- W159705655 hasLocation W1597056551 @default.
- W159705655 hasOpenAccess W159705655 @default.
- W159705655 hasPrimaryLocation W1597056551 @default.
- W159705655 hasRelatedWork W1735076671 @default.
- W159705655 hasRelatedWork W1994763023 @default.
- W159705655 hasRelatedWork W1998266331 @default.
- W159705655 hasRelatedWork W2008363000 @default.
- W159705655 hasRelatedWork W2043471255 @default.
- W159705655 hasRelatedWork W2048878018 @default.
- W159705655 hasRelatedWork W2147579659 @default.
- W159705655 hasRelatedWork W2336942670 @default.
- W159705655 hasRelatedWork W2763799231 @default.
- W159705655 hasRelatedWork W2897063680 @default.
- W159705655 hasRelatedWork W2926940558 @default.
- W159705655 hasRelatedWork W2941277053 @default.
- W159705655 hasRelatedWork W2942768764 @default.
- W159705655 hasRelatedWork W2966079315 @default.
- W159705655 hasRelatedWork W2999301088 @default.
- W159705655 hasRelatedWork W3033630180 @default.
- W159705655 hasRelatedWork W3037819657 @default.
- W159705655 hasRelatedWork W3048287590 @default.
- W159705655 hasRelatedWork W3150978356 @default.
- W159705655 hasRelatedWork W2187653243 @default.
- W159705655 hasVolume "7" @default.
- W159705655 isParatext "false" @default.
- W159705655 isRetracted "false" @default.
- W159705655 magId "159705655" @default.
- W159705655 workType "article" @default.