Matches in SemOpenAlex for { <https://semopenalex.org/work/W1598975340> ?p ?o ?g. }
Showing items 1 to 78 of
78
with 100 items per page.
- W1598975340 abstract "Titanium alloys are attractive materials due to their uniquely high strength–weight ratio, which is maintained at elevated temperatures. Due to the low machinability of titanium alloys, optimization of machining conditions is crucial. Uncoated carbide tool (CNGG 120408-SGF-H13A) was used to turn the titanium alloy Ti-6Al-4V ELI. In this study, the effects of cutting speed, feed rate, and depth of cut parameters were examined. Cutting-speed range of 120–220 m/min was used under flooded conditions. Response surface method (RSM) with a Box-Behnken design was utilized to set the 17 parameter runs. Analysis shows that cutting speed had the greatest effect on tool life, followed by feed rate and depth of cut. Meanwhile the feed rate was most significant factor for surface roughness, Ra of machined surface rather than cutting speed and depth of cut. Additionally, the optimum machining conditions were determined using RSM for both tool life and Ra to be a high cutting-speed of 220 m/min and a low depth of cut and feed rate of 0.4 mm and 0.1 mm/rev, respectively. Here the tool life gave 14.55 min for predicted value, but the validation thru experimental work produced 13.05 min, and the error about 10.65%. Moreover the surface roughness, Ra value for predicted was 0.529µm, meanwhile the validation gave 0.489 µm. This error was calculated to 7.56%." @default.
- W1598975340 created "2016-06-24" @default.
- W1598975340 creator A5011510729 @default.
- W1598975340 creator A5017270119 @default.
- W1598975340 creator A5038586506 @default.
- W1598975340 creator A5053824174 @default.
- W1598975340 date "2014-04-29" @default.
- W1598975340 modified "2023-09-24" @default.
- W1598975340 title "OPTIMIZATION OF TURNING PARAMETERS FOR TITANIUM ALLOY TI-6AL-4V ELI USING THE RESPONSE SURFACE METHOD (RSM)" @default.
- W1598975340 hasPublicationYear "2014" @default.
- W1598975340 type Work @default.
- W1598975340 sameAs 1598975340 @default.
- W1598975340 citedByCount "1" @default.
- W1598975340 countsByYear W15989753402015 @default.
- W1598975340 crossrefType "journal-article" @default.
- W1598975340 hasAuthorship W1598975340A5011510729 @default.
- W1598975340 hasAuthorship W1598975340A5017270119 @default.
- W1598975340 hasAuthorship W1598975340A5038586506 @default.
- W1598975340 hasAuthorship W1598975340A5053824174 @default.
- W1598975340 hasConcept C105795698 @default.
- W1598975340 hasConcept C107365816 @default.
- W1598975340 hasConcept C150077022 @default.
- W1598975340 hasConcept C159985019 @default.
- W1598975340 hasConcept C191897082 @default.
- W1598975340 hasConcept C192562407 @default.
- W1598975340 hasConcept C2775926494 @default.
- W1598975340 hasConcept C2777121994 @default.
- W1598975340 hasConcept C2780026712 @default.
- W1598975340 hasConcept C33923547 @default.
- W1598975340 hasConcept C506065880 @default.
- W1598975340 hasConcept C523214423 @default.
- W1598975340 hasConcept C5335593 @default.
- W1598975340 hasConcept C71039073 @default.
- W1598975340 hasConcept C8953137 @default.
- W1598975340 hasConceptScore W1598975340C105795698 @default.
- W1598975340 hasConceptScore W1598975340C107365816 @default.
- W1598975340 hasConceptScore W1598975340C150077022 @default.
- W1598975340 hasConceptScore W1598975340C159985019 @default.
- W1598975340 hasConceptScore W1598975340C191897082 @default.
- W1598975340 hasConceptScore W1598975340C192562407 @default.
- W1598975340 hasConceptScore W1598975340C2775926494 @default.
- W1598975340 hasConceptScore W1598975340C2777121994 @default.
- W1598975340 hasConceptScore W1598975340C2780026712 @default.
- W1598975340 hasConceptScore W1598975340C33923547 @default.
- W1598975340 hasConceptScore W1598975340C506065880 @default.
- W1598975340 hasConceptScore W1598975340C523214423 @default.
- W1598975340 hasConceptScore W1598975340C5335593 @default.
- W1598975340 hasConceptScore W1598975340C71039073 @default.
- W1598975340 hasConceptScore W1598975340C8953137 @default.
- W1598975340 hasIssue "2" @default.
- W1598975340 hasLocation W15989753401 @default.
- W1598975340 hasOpenAccess W1598975340 @default.
- W1598975340 hasPrimaryLocation W15989753401 @default.
- W1598975340 hasRelatedWork W1933784326 @default.
- W1598975340 hasRelatedWork W2070865188 @default.
- W1598975340 hasRelatedWork W2083160936 @default.
- W1598975340 hasRelatedWork W2095135308 @default.
- W1598975340 hasRelatedWork W2115218811 @default.
- W1598975340 hasRelatedWork W2184426059 @default.
- W1598975340 hasRelatedWork W2256367186 @default.
- W1598975340 hasRelatedWork W2301427575 @default.
- W1598975340 hasRelatedWork W2473522146 @default.
- W1598975340 hasRelatedWork W2570744786 @default.
- W1598975340 hasRelatedWork W2894679966 @default.
- W1598975340 hasRelatedWork W2953846213 @default.
- W1598975340 hasRelatedWork W2962219834 @default.
- W1598975340 hasRelatedWork W2965548458 @default.
- W1598975340 hasRelatedWork W2994167737 @default.
- W1598975340 hasRelatedWork W3131666257 @default.
- W1598975340 hasRelatedWork W3166119419 @default.
- W1598975340 hasRelatedWork W3190402699 @default.
- W1598975340 hasRelatedWork W2209214217 @default.
- W1598975340 hasRelatedWork W2416248541 @default.
- W1598975340 hasVolume "7" @default.
- W1598975340 isParatext "false" @default.
- W1598975340 isRetracted "false" @default.
- W1598975340 magId "1598975340" @default.
- W1598975340 workType "article" @default.