Matches in SemOpenAlex for { <https://semopenalex.org/work/W2010596110> ?p ?o ?g. }
- W2010596110 endingPage "2867" @default.
- W2010596110 startingPage "2859" @default.
- W2010596110 abstract "Dense electrolyte supported micro tubular solid oxide fuel cells (T-SOFCs) were prepared in this study. Green Zr0.8Sc0.2O2 − δ (ScSZ) electrolyte micro-tubes with a thickness of 300 μm were successfully prepared by extrusion at room temperature. After firing at 1400 °C, the bare electrolyte micro-tube with a thickness of 210 μm, a diameter of 3.8 mm, and a length of 40 mm reached a relative density of 96.84% and a flexural strength of 202 MPa. To achieve a better sintering shrinkage match, the electrolyte micro-tubes were pre-sintered at 1100 °C, coated with NiO/ScSZ (60 vol.%:40 vol.%) in the inner surface of the micro-tubes by dip-coating method, and then co-fired at 1400 °C. After co-sintering, the interface of the porous anode layer and the dense electrolyte layer demonstrated good adhesion and mechanical integrity. Subsequently, a La0.8Sr0.2MnO3 − δ (LSM)/Ce0.8Gd0.2O2 − δ (GDC) (80 vol.%:20 vol.%) cathode layer was coated on the outer surface of the micro-tubes by dip-coating method and post-sintered at 1100 °C. The thicknesses of the anode and cathode layers read approximately 28 and 34 μm respectively. After thermal cycling between 30 °C and 800 °C under 97% N2–3%H2 on the anode and air on the cathode, the micro T-SOFCs showed no delamination and retained good adhesion based on the SEM results. The maximum power densities (MPD) of the single cell read 0.26 and 0.23 W cm−2 respectively at 920 and 900 °C, and the open circuit voltage (OCV) reported the same 1.08 V." @default.
- W2010596110 created "2016-06-24" @default.
- W2010596110 creator A5022912018 @default.
- W2010596110 creator A5064806438 @default.
- W2010596110 creator A5066941110 @default.
- W2010596110 date "2013-02-01" @default.
- W2010596110 modified "2023-10-14" @default.
- W2010596110 title "Fabrication of electrolyte supported micro-tubular SOFCs using extrusion and dip-coating" @default.
- W2010596110 cites W1986239356 @default.
- W2010596110 cites W1988658018 @default.
- W2010596110 cites W1996848591 @default.
- W2010596110 cites W2017591438 @default.
- W2010596110 cites W2021123824 @default.
- W2010596110 cites W2027376255 @default.
- W2010596110 cites W2036529435 @default.
- W2010596110 cites W2037749558 @default.
- W2010596110 cites W2048300920 @default.
- W2010596110 cites W2066026669 @default.
- W2010596110 cites W2070176857 @default.
- W2010596110 cites W2074995415 @default.
- W2010596110 cites W2078496856 @default.
- W2010596110 cites W2081476751 @default.
- W2010596110 cites W2084366102 @default.
- W2010596110 cites W2085111084 @default.
- W2010596110 cites W2093732797 @default.
- W2010596110 cites W2095414743 @default.
- W2010596110 cites W2143612818 @default.
- W2010596110 cites W4240621867 @default.
- W2010596110 cites W4375212403 @default.
- W2010596110 doi "https://doi.org/10.1016/j.ijhydene.2012.12.056" @default.
- W2010596110 hasPublicationYear "2013" @default.
- W2010596110 type Work @default.
- W2010596110 sameAs 2010596110 @default.
- W2010596110 citedByCount "40" @default.
- W2010596110 countsByYear W20105961102014 @default.
- W2010596110 countsByYear W20105961102015 @default.
- W2010596110 countsByYear W20105961102016 @default.
- W2010596110 countsByYear W20105961102017 @default.
- W2010596110 countsByYear W20105961102018 @default.
- W2010596110 countsByYear W20105961102019 @default.
- W2010596110 countsByYear W20105961102020 @default.
- W2010596110 countsByYear W20105961102021 @default.
- W2010596110 countsByYear W20105961102022 @default.
- W2010596110 countsByYear W20105961102023 @default.
- W2010596110 crossrefType "journal-article" @default.
- W2010596110 hasAuthorship W2010596110A5022912018 @default.
- W2010596110 hasAuthorship W2010596110A5064806438 @default.
- W2010596110 hasAuthorship W2010596110A5066941110 @default.
- W2010596110 hasConcept C147789679 @default.
- W2010596110 hasConcept C159985019 @default.
- W2010596110 hasConcept C17525397 @default.
- W2010596110 hasConcept C185592680 @default.
- W2010596110 hasConcept C191897082 @default.
- W2010596110 hasConcept C192562407 @default.
- W2010596110 hasConcept C2777581544 @default.
- W2010596110 hasConcept C2778456004 @default.
- W2010596110 hasConcept C2778958987 @default.
- W2010596110 hasConcept C2779227376 @default.
- W2010596110 hasConcept C2779851234 @default.
- W2010596110 hasConcept C2781448156 @default.
- W2010596110 hasConcept C49110097 @default.
- W2010596110 hasConcept C49241924 @default.
- W2010596110 hasConcept C68801617 @default.
- W2010596110 hasConcept C89395315 @default.
- W2010596110 hasConceptScore W2010596110C147789679 @default.
- W2010596110 hasConceptScore W2010596110C159985019 @default.
- W2010596110 hasConceptScore W2010596110C17525397 @default.
- W2010596110 hasConceptScore W2010596110C185592680 @default.
- W2010596110 hasConceptScore W2010596110C191897082 @default.
- W2010596110 hasConceptScore W2010596110C192562407 @default.
- W2010596110 hasConceptScore W2010596110C2777581544 @default.
- W2010596110 hasConceptScore W2010596110C2778456004 @default.
- W2010596110 hasConceptScore W2010596110C2778958987 @default.
- W2010596110 hasConceptScore W2010596110C2779227376 @default.
- W2010596110 hasConceptScore W2010596110C2779851234 @default.
- W2010596110 hasConceptScore W2010596110C2781448156 @default.
- W2010596110 hasConceptScore W2010596110C49110097 @default.
- W2010596110 hasConceptScore W2010596110C49241924 @default.
- W2010596110 hasConceptScore W2010596110C68801617 @default.
- W2010596110 hasConceptScore W2010596110C89395315 @default.
- W2010596110 hasIssue "6" @default.
- W2010596110 hasLocation W20105961101 @default.
- W2010596110 hasOpenAccess W2010596110 @default.
- W2010596110 hasPrimaryLocation W20105961101 @default.
- W2010596110 hasRelatedWork W2048781156 @default.
- W2010596110 hasRelatedWork W2050459210 @default.
- W2010596110 hasRelatedWork W2052934517 @default.
- W2010596110 hasRelatedWork W2098620535 @default.
- W2010596110 hasRelatedWork W2142903095 @default.
- W2010596110 hasRelatedWork W2390705401 @default.
- W2010596110 hasRelatedWork W3006266263 @default.
- W2010596110 hasRelatedWork W3081299411 @default.
- W2010596110 hasRelatedWork W3096712340 @default.
- W2010596110 hasRelatedWork W4210701418 @default.
- W2010596110 hasVolume "38" @default.
- W2010596110 isParatext "false" @default.
- W2010596110 isRetracted "false" @default.
- W2010596110 magId "2010596110" @default.