Matches in SemOpenAlex for { <https://semopenalex.org/work/W2263451503> ?p ?o ?g. }
Showing items 1 to 63 of
63
with 100 items per page.
- W2263451503 abstract "A technique is described which can be used for internally butt welding stainless-steel tubing, as small as 0.240-in. ID by 0.035-in. wall thickness, successfully to thick tubesheets. The conditions are tabulated for welding the tubes to the tube-sheets, and between tubes. The five welds joining 6- and 3-in. lengths of tubing had a good appearance, and all -welds passed the dye-check and mass spectrometer leak tests. Radiographic examinations showed defect-free welds, while two tubes had good strength and ductility. In the simulated tube- sheet, 13 of the 14 welds passed the mass-spectrometer leak test. The failure appeared to have a leak in the tube-sheet extension rather than in the weld. Weld heat input, adequate for tube-to-tube-welding, was not great enough to make full penetration welds in tube to tubesheets. Changing the position of the tungsten electrode, so that it strikes more directly on the heavier tube-sheet extension side of the joint, may give better control of weld drop-through. (B.O.G.)" @default.
- W2263451503 created "2016-06-24" @default.
- W2263451503 creator A5002583613 @default.
- W2263451503 creator A5062414875 @default.
- W2263451503 date "1960-11-01" @default.
- W2263451503 modified "2023-09-23" @default.
- W2263451503 title "TIG WELDING JOINS SMALL STAINLESS TUBES TO THICK TUBE-SHEET" @default.
- W2263451503 hasPublicationYear "1960" @default.
- W2263451503 type Work @default.
- W2263451503 sameAs 2263451503 @default.
- W2263451503 citedByCount "0" @default.
- W2263451503 crossrefType "journal-article" @default.
- W2263451503 hasAuthorship W2263451503A5002583613 @default.
- W2263451503 hasAuthorship W2263451503A5062414875 @default.
- W2263451503 hasConcept C111038815 @default.
- W2263451503 hasConcept C127413603 @default.
- W2263451503 hasConcept C159985019 @default.
- W2263451503 hasConcept C191897082 @default.
- W2263451503 hasConcept C192562407 @default.
- W2263451503 hasConcept C19474535 @default.
- W2263451503 hasConcept C20480867 @default.
- W2263451503 hasConcept C2777551473 @default.
- W2263451503 hasConcept C2780378346 @default.
- W2263451503 hasConcept C3450827 @default.
- W2263451503 hasConcept C87717796 @default.
- W2263451503 hasConceptScore W2263451503C111038815 @default.
- W2263451503 hasConceptScore W2263451503C127413603 @default.
- W2263451503 hasConceptScore W2263451503C159985019 @default.
- W2263451503 hasConceptScore W2263451503C191897082 @default.
- W2263451503 hasConceptScore W2263451503C192562407 @default.
- W2263451503 hasConceptScore W2263451503C19474535 @default.
- W2263451503 hasConceptScore W2263451503C20480867 @default.
- W2263451503 hasConceptScore W2263451503C2777551473 @default.
- W2263451503 hasConceptScore W2263451503C2780378346 @default.
- W2263451503 hasConceptScore W2263451503C3450827 @default.
- W2263451503 hasConceptScore W2263451503C87717796 @default.
- W2263451503 hasLocation W22634515031 @default.
- W2263451503 hasOpenAccess W2263451503 @default.
- W2263451503 hasPrimaryLocation W22634515031 @default.
- W2263451503 hasRelatedWork W2766215545 @default.
- W2263451503 hasRelatedWork W2897415654 @default.
- W2263451503 hasRelatedWork W2906781695 @default.
- W2263451503 hasRelatedWork W29451019 @default.
- W2263451503 hasRelatedWork W780622386 @default.
- W2263451503 hasRelatedWork W869645698 @default.
- W2263451503 hasRelatedWork W2400905708 @default.
- W2263451503 hasRelatedWork W2751566353 @default.
- W2263451503 hasRelatedWork W2819799065 @default.
- W2263451503 hasRelatedWork W2823992979 @default.
- W2263451503 hasRelatedWork W2830953509 @default.
- W2263451503 hasRelatedWork W2843274908 @default.
- W2263451503 hasRelatedWork W2859168947 @default.
- W2263451503 hasRelatedWork W2869647977 @default.
- W2263451503 hasRelatedWork W2872842754 @default.
- W2263451503 hasRelatedWork W2878303924 @default.
- W2263451503 hasRelatedWork W2881209468 @default.
- W2263451503 hasRelatedWork W2925741110 @default.
- W2263451503 hasRelatedWork W2926382391 @default.
- W2263451503 hasRelatedWork W3144906057 @default.
- W2263451503 isParatext "false" @default.
- W2263451503 isRetracted "false" @default.
- W2263451503 magId "2263451503" @default.
- W2263451503 workType "article" @default.