Matches in SemOpenAlex for { <https://semopenalex.org/work/W2743163915> ?p ?o ?g. }
Showing items 1 to 77 of
77
with 100 items per page.
- W2743163915 abstract "This paper presents the results of an optimisation study of low speed machining of Ti-6Al-4V alloy by technique of order preference by similarity to ideal solution (TOPSIS). End milling was conducted under dry and minimum quantity lubrication (MQL) conditions and at different levels of cutting speed (20 to 40 m/min), feed (0.05 to 0.15 mm/rev) and axial depth of cut (0.4 to 1.2 mm) using a full factorial design. Machinability was evaluated by measuring surface roughness and cutting forces. The micro-hardness below the machined surface for some selected combinations of cutting conditions was also measured. It was found that the feed per rev and depth of cut have the greatest influence on cutting forces and surface roughness under dry and MQL conditions. The minimum cutting forces and minimum surface roughness are obtainable at cutting speed of 30 mm/min, feed of 0.05 to 0.1 mm/rev and depth of cut of 0.4 mm under MQL condition. It was also found that these conditions result in the minimum alteration of micro-hardness beneath the machined surface." @default.
- W2743163915 created "2017-08-17" @default.
- W2743163915 creator A5001317548 @default.
- W2743163915 creator A5018620516 @default.
- W2743163915 creator A5088233035 @default.
- W2743163915 date "2017-01-01" @default.
- W2743163915 modified "2023-09-23" @default.
- W2743163915 title "An experimental study on end milling of titanium alloy (Ti-6Al-4V) under dry and minimum quantity lubrication conditions" @default.
- W2743163915 doi "https://doi.org/10.1504/ijmmm.2017.10006834" @default.
- W2743163915 hasPublicationYear "2017" @default.
- W2743163915 type Work @default.
- W2743163915 sameAs 2743163915 @default.
- W2743163915 citedByCount "1" @default.
- W2743163915 countsByYear W27431639152019 @default.
- W2743163915 crossrefType "journal-article" @default.
- W2743163915 hasAuthorship W2743163915A5001317548 @default.
- W2743163915 hasAuthorship W2743163915A5018620516 @default.
- W2743163915 hasAuthorship W2743163915A5088233035 @default.
- W2743163915 hasConcept C105795698 @default.
- W2743163915 hasConcept C107365816 @default.
- W2743163915 hasConcept C159985019 @default.
- W2743163915 hasConcept C169222746 @default.
- W2743163915 hasConcept C184608416 @default.
- W2743163915 hasConcept C191897082 @default.
- W2743163915 hasConcept C192562407 @default.
- W2743163915 hasConcept C2775926494 @default.
- W2743163915 hasConcept C2779952096 @default.
- W2743163915 hasConcept C2780026712 @default.
- W2743163915 hasConcept C33923547 @default.
- W2743163915 hasConcept C42475967 @default.
- W2743163915 hasConcept C51566761 @default.
- W2743163915 hasConcept C523214423 @default.
- W2743163915 hasConcept C71039073 @default.
- W2743163915 hasConcept C8953137 @default.
- W2743163915 hasConceptScore W2743163915C105795698 @default.
- W2743163915 hasConceptScore W2743163915C107365816 @default.
- W2743163915 hasConceptScore W2743163915C159985019 @default.
- W2743163915 hasConceptScore W2743163915C169222746 @default.
- W2743163915 hasConceptScore W2743163915C184608416 @default.
- W2743163915 hasConceptScore W2743163915C191897082 @default.
- W2743163915 hasConceptScore W2743163915C192562407 @default.
- W2743163915 hasConceptScore W2743163915C2775926494 @default.
- W2743163915 hasConceptScore W2743163915C2779952096 @default.
- W2743163915 hasConceptScore W2743163915C2780026712 @default.
- W2743163915 hasConceptScore W2743163915C33923547 @default.
- W2743163915 hasConceptScore W2743163915C42475967 @default.
- W2743163915 hasConceptScore W2743163915C51566761 @default.
- W2743163915 hasConceptScore W2743163915C523214423 @default.
- W2743163915 hasConceptScore W2743163915C71039073 @default.
- W2743163915 hasConceptScore W2743163915C8953137 @default.
- W2743163915 hasLocation W27431639151 @default.
- W2743163915 hasOpenAccess W2743163915 @default.
- W2743163915 hasPrimaryLocation W27431639151 @default.
- W2743163915 hasRelatedWork W12917432 @default.
- W2743163915 hasRelatedWork W1530360061 @default.
- W2743163915 hasRelatedWork W1979349758 @default.
- W2743163915 hasRelatedWork W1983231124 @default.
- W2743163915 hasRelatedWork W1988142215 @default.
- W2743163915 hasRelatedWork W2013152302 @default.
- W2743163915 hasRelatedWork W2034449621 @default.
- W2743163915 hasRelatedWork W218255592 @default.
- W2743163915 hasRelatedWork W2239118637 @default.
- W2743163915 hasRelatedWork W2260220807 @default.
- W2743163915 hasRelatedWork W2336942670 @default.
- W2743163915 hasRelatedWork W2407599012 @default.
- W2743163915 hasRelatedWork W2512132746 @default.
- W2743163915 hasRelatedWork W2901452212 @default.
- W2743163915 hasRelatedWork W2903581090 @default.
- W2743163915 hasRelatedWork W2967200120 @default.
- W2743163915 hasRelatedWork W3026056109 @default.
- W2743163915 hasRelatedWork W3063980559 @default.
- W2743163915 hasRelatedWork W3200457959 @default.
- W2743163915 hasRelatedWork W3112197030 @default.
- W2743163915 isParatext "false" @default.
- W2743163915 isRetracted "false" @default.
- W2743163915 magId "2743163915" @default.
- W2743163915 workType "article" @default.