Matches in SemOpenAlex for { <https://semopenalex.org/work/W2746478680> ?p ?o ?g. }
Showing items 1 to 70 of
70
with 100 items per page.
- W2746478680 abstract "Nickel is one of the alloying elements promoting the formation of acicular ferrite at the expense of proeutectoid ferrite. The Ni addition reduces the steady-state nucleation rates of grain boundary ferrite allotriomorph in Fe-C-Ni alloys. Due to such reasons, Ni was added to modify the microstructure of the sintered steel, investigated in this study, with the aim of improved mechanical properties. The sintered steel, produced from pre-alloyed Fe-Cr-Mo powder mixed with 0.3 wt.% C, was modified by Ni addition and cooling rate. The alloy compositional change was performed additions of varied Ni contents of 1.0, 1.5, 2.0, 2.5 and 3.0 wt.%. The material processing variables were investigated by using two different cooling rates of 0.1 and 5.4 °Cs -1 . Under the cooling rate of 0.1 °Cs -1 , the sintered Fe-Cr-Mo-3C steel without Ni addition showed dual-phase microstructure consisting of ferrite (soft phase) and bainite (hard structure). With Ni additions, the dual-phase microstructure was replaced by bainitic structure. Microstructural heterogeneity was observed due to the presence of Ni-rich areas, which increased with increasing added Ni contents. Under the cooling rate of 5.4 °Cs -1 , the sintered Fe-Cr-Mo-3C steels with and without Ni additions showed bainitic structure. Microstructural heterogeneity was similar to that of slowly cooled steel. Ni additions not only modified the sintered steel microstructure but increased tensile strength and elongation. In general, Ni pushes the C-curve of pearlite transformation to the right hand side and lowers the martensite start temperature. The absence of ferrite from the sintered steel with only 1 wt.% Ni addition and slowly cooled at 0.1 °Cs -1 suggests that Ni strongly suppresses the austenite → ferrite transformation. In another word, Ni promotes bainite formation in the sintered Fe-Cr-Mo-Ni-C steels." @default.
- W2746478680 created "2017-08-31" @default.
- W2746478680 creator A5011829391 @default.
- W2746478680 creator A5017499343 @default.
- W2746478680 creator A5045913653 @default.
- W2746478680 creator A5046550004 @default.
- W2746478680 creator A5065020586 @default.
- W2746478680 creator A5074291348 @default.
- W2746478680 date "2017-08-01" @default.
- W2746478680 modified "2023-09-27" @default.
- W2746478680 title "Modification of Microstructure and Tensile Property of Sintered Fe-Cr-Mo-C Steel by Nickel Addition" @default.
- W2746478680 cites W1617949019 @default.
- W2746478680 cites W1996851670 @default.
- W2746478680 cites W2010823967 @default.
- W2746478680 cites W2048828557 @default.
- W2746478680 cites W2082974957 @default.
- W2746478680 cites W2151512229 @default.
- W2746478680 cites W2166778448 @default.
- W2746478680 cites W2241445578 @default.
- W2746478680 cites W2321987630 @default.
- W2746478680 doi "https://doi.org/10.4028/www.scientific.net/kem.751.42" @default.
- W2746478680 hasPublicationYear "2017" @default.
- W2746478680 type Work @default.
- W2746478680 sameAs 2746478680 @default.
- W2746478680 citedByCount "1" @default.
- W2746478680 countsByYear W27464786802017 @default.
- W2746478680 crossrefType "journal-article" @default.
- W2746478680 hasAuthorship W2746478680A5011829391 @default.
- W2746478680 hasAuthorship W2746478680A5017499343 @default.
- W2746478680 hasAuthorship W2746478680A5045913653 @default.
- W2746478680 hasAuthorship W2746478680A5046550004 @default.
- W2746478680 hasAuthorship W2746478680A5065020586 @default.
- W2746478680 hasAuthorship W2746478680A5074291348 @default.
- W2746478680 hasConcept C112950240 @default.
- W2746478680 hasConcept C191897082 @default.
- W2746478680 hasConcept C192562407 @default.
- W2746478680 hasConcept C504270822 @default.
- W2746478680 hasConcept C87976508 @default.
- W2746478680 hasConceptScore W2746478680C112950240 @default.
- W2746478680 hasConceptScore W2746478680C191897082 @default.
- W2746478680 hasConceptScore W2746478680C192562407 @default.
- W2746478680 hasConceptScore W2746478680C504270822 @default.
- W2746478680 hasConceptScore W2746478680C87976508 @default.
- W2746478680 hasLocation W27464786801 @default.
- W2746478680 hasOpenAccess W2746478680 @default.
- W2746478680 hasPrimaryLocation W27464786801 @default.
- W2746478680 hasRelatedWork W1700591018 @default.
- W2746478680 hasRelatedWork W1999934966 @default.
- W2746478680 hasRelatedWork W2018502738 @default.
- W2746478680 hasRelatedWork W2041353577 @default.
- W2746478680 hasRelatedWork W2048268562 @default.
- W2746478680 hasRelatedWork W2053748575 @default.
- W2746478680 hasRelatedWork W2064123118 @default.
- W2746478680 hasRelatedWork W2507254955 @default.
- W2746478680 hasRelatedWork W2511866127 @default.
- W2746478680 hasRelatedWork W2524481994 @default.
- W2746478680 hasRelatedWork W2791138416 @default.
- W2746478680 hasRelatedWork W2800034792 @default.
- W2746478680 hasRelatedWork W2903453340 @default.
- W2746478680 hasRelatedWork W3048670991 @default.
- W2746478680 hasRelatedWork W3123535944 @default.
- W2746478680 hasRelatedWork W3160081264 @default.
- W2746478680 hasRelatedWork W3160914887 @default.
- W2746478680 hasRelatedWork W424544061 @default.
- W2746478680 hasRelatedWork W50700945 @default.
- W2746478680 hasRelatedWork W2870665143 @default.
- W2746478680 isParatext "false" @default.
- W2746478680 isRetracted "false" @default.
- W2746478680 magId "2746478680" @default.
- W2746478680 workType "article" @default.