Matches in SemOpenAlex for { <https://semopenalex.org/work/W2752799606> ?p ?o ?g. }
Showing items 1 to 75 of
75
with 100 items per page.
- W2752799606 abstract "Through thickness microstructure and mechanical properties of defect-free electron beam welded 20 mm thick AISI 316L austenitic stainless steel has been investigated as a function of beam power. The weld microstructure is characterised by a columnar and equiaxed dendritic ferrite in an austenite matrix. The dendritic structure was finer at the bottom of the weld zone. A microstructural boundary called “Parting” was seen along the weld centreline. Tensile tests, using a digital image correlation technique, demonstrated that the highest strain was concentrated in the fusion zone. The bottom section of the weld metal exhibited a yield strength of about 14 – 52 MPa higher than the top section. The ultimate tensile strength in the bottom of the weld was also about 4% higher than the top. The final fracture was detected in the parting region. It was observed from the EBSD scan that the grains in the weld zone contained a weak orientation and showed a high Schmid factor intensity with interception between some strong grains and soft grains at the weld centreline boundary. This explains the high weld ductility and the failure to happen in the parting region.Dissimilar welding of 20 mm thick AISI 316L stainless steel to TiAl6V4 using electron beam welding process was carried out. A successful joint was possible through using of copper sheet with 1.5 mm thick as a transition layer between the two metals. Preheating the weld samples was performed to lower the heat input and reduce the residual stresses. A double pass welding technique was applied to achieve full weld penetration. The weld microstructure was studied by SEM, EDS and XRD. The sensitivity of the microstructure to cracking was evaluated by a microhardness test of the weld cross-section. The weld region near the stainless steel contained Fe and Cu in solid solution. While the weld area near the titanium alloy characterised by the copper solid solution with Cu-Ti and Cu-Fe- Ti intermetallic phases. Ti-Fe intermetallic compounds was suppressed and replaced by relatively soft Cu-Ti intermetallics, which significantly improved the joint toughness. However, the formation of Ti-Cu at the Ti/Cu interface makes this region still susceptible to cracking." @default.
- W2752799606 created "2017-09-15" @default.
- W2752799606 creator A5073397515 @default.
- W2752799606 date "2017-08-01" @default.
- W2752799606 modified "2023-09-28" @default.
- W2752799606 title "Through-thickness microstructure and mechanical properties of electron beam similar welded AISI 316L stainless steel and dissimilar welded AISI 316L / Ti6Al4V" @default.
- W2752799606 hasPublicationYear "2017" @default.
- W2752799606 type Work @default.
- W2752799606 sameAs 2752799606 @default.
- W2752799606 citedByCount "0" @default.
- W2752799606 crossrefType "dissertation" @default.
- W2752799606 hasAuthorship W2752799606A5073397515 @default.
- W2752799606 hasConcept C112950240 @default.
- W2752799606 hasConcept C121332964 @default.
- W2752799606 hasConcept C146868986 @default.
- W2752799606 hasConcept C147120987 @default.
- W2752799606 hasConcept C159985019 @default.
- W2752799606 hasConcept C191897082 @default.
- W2752799606 hasConcept C192562407 @default.
- W2752799606 hasConcept C19474535 @default.
- W2752799606 hasConcept C20625102 @default.
- W2752799606 hasConcept C2779229422 @default.
- W2752799606 hasConcept C27805521 @default.
- W2752799606 hasConcept C37210646 @default.
- W2752799606 hasConcept C59616599 @default.
- W2752799606 hasConcept C62520636 @default.
- W2752799606 hasConcept C81710450 @default.
- W2752799606 hasConcept C87976508 @default.
- W2752799606 hasConcept C95312477 @default.
- W2752799606 hasConcept C96288455 @default.
- W2752799606 hasConceptScore W2752799606C112950240 @default.
- W2752799606 hasConceptScore W2752799606C121332964 @default.
- W2752799606 hasConceptScore W2752799606C146868986 @default.
- W2752799606 hasConceptScore W2752799606C147120987 @default.
- W2752799606 hasConceptScore W2752799606C159985019 @default.
- W2752799606 hasConceptScore W2752799606C191897082 @default.
- W2752799606 hasConceptScore W2752799606C192562407 @default.
- W2752799606 hasConceptScore W2752799606C19474535 @default.
- W2752799606 hasConceptScore W2752799606C20625102 @default.
- W2752799606 hasConceptScore W2752799606C2779229422 @default.
- W2752799606 hasConceptScore W2752799606C27805521 @default.
- W2752799606 hasConceptScore W2752799606C37210646 @default.
- W2752799606 hasConceptScore W2752799606C59616599 @default.
- W2752799606 hasConceptScore W2752799606C62520636 @default.
- W2752799606 hasConceptScore W2752799606C81710450 @default.
- W2752799606 hasConceptScore W2752799606C87976508 @default.
- W2752799606 hasConceptScore W2752799606C95312477 @default.
- W2752799606 hasConceptScore W2752799606C96288455 @default.
- W2752799606 hasLocation W27527996061 @default.
- W2752799606 hasOpenAccess W2752799606 @default.
- W2752799606 hasPrimaryLocation W27527996061 @default.
- W2752799606 hasRelatedWork W101048638 @default.
- W2752799606 hasRelatedWork W2092860551 @default.
- W2752799606 hasRelatedWork W2269716307 @default.
- W2752799606 hasRelatedWork W2353194991 @default.
- W2752799606 hasRelatedWork W2363845766 @default.
- W2752799606 hasRelatedWork W2363889773 @default.
- W2752799606 hasRelatedWork W2365955430 @default.
- W2752799606 hasRelatedWork W2367399105 @default.
- W2752799606 hasRelatedWork W2372995996 @default.
- W2752799606 hasRelatedWork W2377202269 @default.
- W2752799606 hasRelatedWork W2385459268 @default.
- W2752799606 hasRelatedWork W2548426941 @default.
- W2752799606 hasRelatedWork W2617549684 @default.
- W2752799606 hasRelatedWork W2949652295 @default.
- W2752799606 hasRelatedWork W2998197798 @default.
- W2752799606 hasRelatedWork W3023561249 @default.
- W2752799606 hasRelatedWork W3048585989 @default.
- W2752799606 hasRelatedWork W3084077429 @default.
- W2752799606 hasRelatedWork W3152548173 @default.
- W2752799606 hasRelatedWork W3205294962 @default.
- W2752799606 isParatext "false" @default.
- W2752799606 isRetracted "false" @default.
- W2752799606 magId "2752799606" @default.
- W2752799606 workType "dissertation" @default.