FRINK Linked Data Fragments server

Matches in SemOpenAlex for { <https://semopenalex.org/work/W2788124761> ?p ?o ?g. }

• W2788124761 endingPage "87" @default.
• W2788124761 startingPage "79" @default.
• W2788124761 abstract "In this work, pure aluminium powders of different average particle size were compacted, sintered into discs and tested for mechanical strength at different strain rates. The effects of average particle size (15, 19, and 35 μm), sintering rate (5 and 20 °C/min) and sample indentation test speed (0.5, 0.7, and 1.0 mm/min) were examined. A compaction pressure of 332 MPa with a holding time of six minutes was used to produce the green compacted discs. The consolidated green specimens were sintered with a holding time of 4 h, a temperature of 600 °C in an argon atmosphere. The resulting sintered samples contained higher than 85% density. The mechanical properties and microstructure were characterized using indentation strength measurement tests and SEM analysis respectively. After sintering, the aluminium grain structure was observed to be of uniform size within the fractured samples. The indentation test measurements showed that for the same sintering rate, the 35 μm powder particle size provided the highest radial and tangential strength while the 15 μm powder provided the lowest strengths. Another important finding from this work was the increase in sintered sample strength which was achieved using the lower sinter heating rate, 5 °C/min. This resulted in a tangential stress value of 365 MPa which was significantly higher than achieved, 244 MPa, using the faster sintering heating rate, 20 °C/min." @default.
• W2788124761 created "2018-03-06" @default.
• W2788124761 creator A5000760824 @default.
• W2788124761 creator A5009145209 @default.
• W2788124761 creator A5010195068 @default.
• W2788124761 creator A5028009856 @default.
• W2788124761 creator A5039614016 @default.
• W2788124761 creator A5042740208 @default.
• W2788124761 creator A5046694232 @default.
• W2788124761 creator A5070419283 @default.
• W2788124761 creator A5078340779 @default.
• W2788124761 creator A5079057974 @default.
• W2788124761 creator A5079904906 @default.
• W2788124761 creator A5087437378 @default.
• W2788124761 date "2018-02-19" @default.
• W2788124761 modified "2023-09-27" @default.
• W2788124761 title "Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties" @default.
• W2788124761 cites W1470050477 @default.
• W2788124761 cites W1974722960 @default.
• W2788124761 cites W1984426253 @default.
• W2788124761 cites W1987697549 @default.
• W2788124761 cites W1989301204 @default.
• W2788124761 cites W1996507411 @default.
• W2788124761 cites W1998793529 @default.
• W2788124761 cites W2001221497 @default.
• W2788124761 cites W2037962563 @default.
• W2788124761 cites W2069889963 @default.
• W2788124761 cites W2081741237 @default.
• W2788124761 cites W2227774903 @default.
• W2788124761 cites W2543747630 @default.
• W2788124761 cites W2546550611 @default.
• W2788124761 cites W2548452764 @default.
• W2788124761 cites W2550140480 @default.
• W2788124761 cites W2554271521 @default.
• W2788124761 cites W2581882814 @default.
• W2788124761 cites W2586188928 @default.
• W2788124761 cites W2588816187 @default.
• W2788124761 cites W2605634819 @default.
• W2788124761 cites W2608764236 @default.
• W2788124761 cites W2608898311 @default.
• W2788124761 cites W2616985690 @default.
• W2788124761 cites W2755604136 @default.
• W2788124761 cites W4242730536 @default.
• W2788124761 cites W4256210624 @default.
• W2788124761 doi "https://doi.org/10.1007/s12289-018-1408-5" @default.
• W2788124761 hasPublicationYear "2018" @default.
• W2788124761 type Work @default.
• W2788124761 sameAs 2788124761 @default.
• W2788124761 citedByCount "9" @default.
• W2788124761 countsByYear W27881247612019 @default.
• W2788124761 countsByYear W27881247612021 @default.
• W2788124761 countsByYear W27881247612022 @default.
• W2788124761 crossrefType "journal-article" @default.
• W2788124761 hasAuthorship W2788124761A5000760824 @default.
• W2788124761 hasAuthorship W2788124761A5009145209 @default.
• W2788124761 hasAuthorship W2788124761A5010195068 @default.
• W2788124761 hasAuthorship W2788124761A5028009856 @default.
• W2788124761 hasAuthorship W2788124761A5039614016 @default.
• W2788124761 hasAuthorship W2788124761A5042740208 @default.
• W2788124761 hasAuthorship W2788124761A5046694232 @default.
• W2788124761 hasAuthorship W2788124761A5070419283 @default.
• W2788124761 hasAuthorship W2788124761A5078340779 @default.
• W2788124761 hasAuthorship W2788124761A5079057974 @default.
• W2788124761 hasAuthorship W2788124761A5079904906 @default.
• W2788124761 hasAuthorship W2788124761A5087437378 @default.
• W2788124761 hasBestOaLocation W27881247612 @default.
• W2788124761 hasConcept C111368507 @default.
• W2788124761 hasConcept C127313418 @default.
• W2788124761 hasConcept C147789679 @default.
• W2788124761 hasConcept C159985019 @default.
• W2788124761 hasConcept C185592680 @default.
• W2788124761 hasConcept C187530423 @default.
• W2788124761 hasConcept C191897082 @default.
• W2788124761 hasConcept C192191005 @default.
• W2788124761 hasConcept C192562407 @default.
• W2788124761 hasConcept C196715460 @default.
• W2788124761 hasConcept C2776762104 @default.
• W2788124761 hasConcept C2777581544 @default.
• W2788124761 hasConcept C2778517922 @default.
• W2788124761 hasConcept C2780902562 @default.
• W2788124761 hasConcept C513153333 @default.
• W2788124761 hasConcept C7794659 @default.
• W2788124761 hasConcept C87976508 @default.
• W2788124761 hasConceptScore W2788124761C111368507 @default.
• W2788124761 hasConceptScore W2788124761C127313418 @default.
• W2788124761 hasConceptScore W2788124761C147789679 @default.
• W2788124761 hasConceptScore W2788124761C159985019 @default.
• W2788124761 hasConceptScore W2788124761C185592680 @default.
• W2788124761 hasConceptScore W2788124761C187530423 @default.
• W2788124761 hasConceptScore W2788124761C191897082 @default.
• W2788124761 hasConceptScore W2788124761C192191005 @default.
• W2788124761 hasConceptScore W2788124761C192562407 @default.
• W2788124761 hasConceptScore W2788124761C196715460 @default.
• W2788124761 hasConceptScore W2788124761C2776762104 @default.
• W2788124761 hasConceptScore W2788124761C2777581544 @default.
• W2788124761 hasConceptScore W2788124761C2778517922 @default.
• W2788124761 hasConceptScore W2788124761C2780902562 @default.
• W2788124761 hasConceptScore W2788124761C513153333 @default.

• next