Matches in SemOpenAlex for { <https://semopenalex.org/work/W3045517265> ?p ?o ?g. }
Showing items 1 to 77 of
77
with 100 items per page.
- W3045517265 startingPage "30524" @default.
- W3045517265 abstract "The performance deterioration of a high-speed axial compressor rotor due to surface roughness and airfoil thickness variations is reported. A 0.025 mm (0.001 in.) thick rough coating with a surface finish of 2.54-3.18 rms μm (100-125 rms μin.) is applied to the pressure and suction surface of the rotor blades. Coating both surfaces increases the leading edge thickness by 10 percent at the hub and 20 percent at the tip. Application of this coating results in a loss in efficiency of 6 points and a 9 percent reduction in the pressure ratio across the rotor at an operating condition near the design point. To separate the effects of thickness and roughness, a smooth coating of equal thickness is also applied to the blade. The smooth coating surface finish is 0.254-0.508 rms μm (10-20 rms μin.), compared to the bare metal blade surface finish of 0.508 rms μm (20 rms μin.). The smooth coating results in approximately half of the performance deterioration found from the rough coating. Both coatings are then applied to different portions of the blade surface to determine which portions of the airfoil are most sensitive to thickness/roughness variations. Aerodynamic performance measurements are presented for a number of coating configurations at 60, 80, and 100 percent of design speed. The results indicate that thickness/roughness over the first 2 percent of blade chord accounts for virtually all of the observed performance degradation for the smooth coating, compared to about 70 percent of the observed performance degradation for the rough coating. The performance deterioration is investigated in more detail at design speed using laser anemometer measurements as well as predictions generated by a quasi-three-dimensional Navier-Stokes flow solver, which includes a surface roughness model. Measurements and analysis are performed on the baseline blade and the full-coverage smooth and rough coatings. The results indicate that adding roughness at the blade leading edge causes a thickening of the blade boundary layers. The interaction between the rotor passage shock and the thickened suction surface boundary layer then results in an increase in blockage, which reduces the diffusion level in the rear half of the blade passage, thus reducing the aerodynamic performance of the rotor." @default.
- W3045517265 created "2020-08-03" @default.
- W3045517265 creator A5039310932 @default.
- W3045517265 creator A5051165176 @default.
- W3045517265 creator A5057819317 @default.
- W3045517265 creator A5067552453 @default.
- W3045517265 date "1995-06-01" @default.
- W3045517265 modified "2023-09-23" @default.
- W3045517265 title "The effect of adding roughness and thickness to a transonic axial compressor rotor" @default.
- W3045517265 hasPublicationYear "1995" @default.
- W3045517265 type Work @default.
- W3045517265 sameAs 3045517265 @default.
- W3045517265 citedByCount "0" @default.
- W3045517265 crossrefType "journal-article" @default.
- W3045517265 hasAuthorship W3045517265A5039310932 @default.
- W3045517265 hasAuthorship W3045517265A5051165176 @default.
- W3045517265 hasAuthorship W3045517265A5057819317 @default.
- W3045517265 hasAuthorship W3045517265A5067552453 @default.
- W3045517265 hasConcept C107365816 @default.
- W3045517265 hasConcept C112124176 @default.
- W3045517265 hasConcept C120314980 @default.
- W3045517265 hasConcept C127413603 @default.
- W3045517265 hasConcept C131097465 @default.
- W3045517265 hasConcept C159985019 @default.
- W3045517265 hasConcept C17281054 @default.
- W3045517265 hasConcept C192562407 @default.
- W3045517265 hasConcept C194147245 @default.
- W3045517265 hasConcept C2779570065 @default.
- W3045517265 hasConcept C2781448156 @default.
- W3045517265 hasConcept C41008148 @default.
- W3045517265 hasConcept C66938386 @default.
- W3045517265 hasConcept C71039073 @default.
- W3045517265 hasConcept C78519656 @default.
- W3045517265 hasConceptScore W3045517265C107365816 @default.
- W3045517265 hasConceptScore W3045517265C112124176 @default.
- W3045517265 hasConceptScore W3045517265C120314980 @default.
- W3045517265 hasConceptScore W3045517265C127413603 @default.
- W3045517265 hasConceptScore W3045517265C131097465 @default.
- W3045517265 hasConceptScore W3045517265C159985019 @default.
- W3045517265 hasConceptScore W3045517265C17281054 @default.
- W3045517265 hasConceptScore W3045517265C192562407 @default.
- W3045517265 hasConceptScore W3045517265C194147245 @default.
- W3045517265 hasConceptScore W3045517265C2779570065 @default.
- W3045517265 hasConceptScore W3045517265C2781448156 @default.
- W3045517265 hasConceptScore W3045517265C41008148 @default.
- W3045517265 hasConceptScore W3045517265C66938386 @default.
- W3045517265 hasConceptScore W3045517265C71039073 @default.
- W3045517265 hasConceptScore W3045517265C78519656 @default.
- W3045517265 hasLocation W30455172651 @default.
- W3045517265 hasOpenAccess W3045517265 @default.
- W3045517265 hasPrimaryLocation W30455172651 @default.
- W3045517265 hasRelatedWork W1494471485 @default.
- W3045517265 hasRelatedWork W1661125696 @default.
- W3045517265 hasRelatedWork W1994608537 @default.
- W3045517265 hasRelatedWork W1997625362 @default.
- W3045517265 hasRelatedWork W2013822521 @default.
- W3045517265 hasRelatedWork W2016299239 @default.
- W3045517265 hasRelatedWork W2040257635 @default.
- W3045517265 hasRelatedWork W2043680855 @default.
- W3045517265 hasRelatedWork W2055091627 @default.
- W3045517265 hasRelatedWork W2081301532 @default.
- W3045517265 hasRelatedWork W2189319469 @default.
- W3045517265 hasRelatedWork W2315554949 @default.
- W3045517265 hasRelatedWork W2357255344 @default.
- W3045517265 hasRelatedWork W2379628530 @default.
- W3045517265 hasRelatedWork W2461074182 @default.
- W3045517265 hasRelatedWork W2765180171 @default.
- W3045517265 hasRelatedWork W3025795324 @default.
- W3045517265 hasRelatedWork W3165437861 @default.
- W3045517265 hasRelatedWork W3203805629 @default.
- W3045517265 hasRelatedWork W2560088574 @default.
- W3045517265 hasVolume "95" @default.
- W3045517265 isParatext "false" @default.
- W3045517265 isRetracted "false" @default.
- W3045517265 magId "3045517265" @default.
- W3045517265 workType "article" @default.