Matches in SemOpenAlex for { <https://semopenalex.org/work/W3139258049> ?p ?o ?g. }
Showing items 1 to 83 of
83
with 100 items per page.
- W3139258049 abstract "Abstract Experimental measurements have been made to evaluate the rotordynamic performance of straight-through labyrinth seals under conditions that are realistic for many turbomachines. Both teeth-on-rotor and teeth-on-stator gas seals were tested, each with twelve blades, 173 mm (6.8″) blade diameter, and 102 mm (4″) total length. The nominal blade tip clearance was 0.5 mm (20 mils). The teeth-on-stator seal was tested with the blade tip clearances diverging (in the direction of the flow), uniform, and converging. The teeth-on-rotor seal was tested with uniform clearances. The inlet air pressure to the seals was varied from 1.7 bar to 14.6 bar (25 psi to 200 psig) with the last blade exhausting to the atmosphere. Coastdown tests of all the seals were performed on a rotordynamic test rig to show their effect on synchronous response to imbalance when passing through a 3700 rpm critical speed. For the teeth-on-rotor seal, rap tests at 4500 rpm were also conducted to measure the effective damping coefficient for subsynchronous vibration. The synchronous response to imbalance was generally increased by all the seals at inlet pressures up to about 11.2 bar (150 psig). The worst case was for the teeth-on-rotor seal at about 2.7 bar (35–45 psi) inlet pressure where the rotor whirl amplitude was increased from .1 mm (3.75 mils, peak to peak) to over .13 mm (5 mils). In most cases the rotor whirl amplitude was slightly decreased at inlet pressures above 13 bar (176 psig). The teeth-on-rotor seal provided a small amount of damping to attenuate the 61 Hz subsynchronous vibration with the rotor running at 4500 rpm. A computer model which includes both the rotor and housing dynamics was developed to evaluate the possible range of values of the rotordynamic seal coefficients. Simulations show that the effective subsynchronous damping coefficient of the teeth-on-rotor seal ranges from 175 N-s/m at 5.1 bar inlet pressure (1 lb-s/in at 75 psi) to 876 N-s/m at 10.2 bar (5 lb-s/in at 150 psi). This corresponds to a range of 0.3% to 1.4% of critical damping added by the seal for subsynchronous vibration, even though the seal increased the synchronous response at the critical speed. It is shown that the orbit conditions for the synchronous and subsynchronous tests were radically different, as they likely will be in most turbomachines." @default.
- W3139258049 created "2021-03-29" @default.
- W3139258049 creator A5018432704 @default.
- W3139258049 creator A5024765459 @default.
- W3139258049 creator A5061161290 @default.
- W3139258049 date "1993-09-19" @default.
- W3139258049 modified "2023-10-18" @default.
- W3139258049 title "Effect of Straight Through Labyrinth Seals on Rotordynamics" @default.
- W3139258049 doi "https://doi.org/10.1115/detc1993-0190" @default.
- W3139258049 hasPublicationYear "1993" @default.
- W3139258049 type Work @default.
- W3139258049 sameAs 3139258049 @default.
- W3139258049 citedByCount "6" @default.
- W3139258049 countsByYear W31392580492022 @default.
- W3139258049 crossrefType "proceedings-article" @default.
- W3139258049 hasAuthorship W3139258049A5018432704 @default.
- W3139258049 hasAuthorship W3139258049A5024765459 @default.
- W3139258049 hasAuthorship W3139258049A5061161290 @default.
- W3139258049 hasConcept C111368507 @default.
- W3139258049 hasConcept C120665830 @default.
- W3139258049 hasConcept C121332964 @default.
- W3139258049 hasConcept C127313418 @default.
- W3139258049 hasConcept C127413603 @default.
- W3139258049 hasConcept C142362112 @default.
- W3139258049 hasConcept C153349607 @default.
- W3139258049 hasConcept C159985019 @default.
- W3139258049 hasConcept C17281054 @default.
- W3139258049 hasConcept C180205008 @default.
- W3139258049 hasConcept C188721877 @default.
- W3139258049 hasConcept C192562407 @default.
- W3139258049 hasConcept C198394728 @default.
- W3139258049 hasConcept C201289731 @default.
- W3139258049 hasConcept C24890656 @default.
- W3139258049 hasConcept C2776132848 @default.
- W3139258049 hasConcept C2776529397 @default.
- W3139258049 hasConcept C2777755289 @default.
- W3139258049 hasConcept C2779372316 @default.
- W3139258049 hasConcept C2780313912 @default.
- W3139258049 hasConcept C2780581274 @default.
- W3139258049 hasConcept C57879066 @default.
- W3139258049 hasConcept C66938386 @default.
- W3139258049 hasConcept C78519656 @default.
- W3139258049 hasConceptScore W3139258049C111368507 @default.
- W3139258049 hasConceptScore W3139258049C120665830 @default.
- W3139258049 hasConceptScore W3139258049C121332964 @default.
- W3139258049 hasConceptScore W3139258049C127313418 @default.
- W3139258049 hasConceptScore W3139258049C127413603 @default.
- W3139258049 hasConceptScore W3139258049C142362112 @default.
- W3139258049 hasConceptScore W3139258049C153349607 @default.
- W3139258049 hasConceptScore W3139258049C159985019 @default.
- W3139258049 hasConceptScore W3139258049C17281054 @default.
- W3139258049 hasConceptScore W3139258049C180205008 @default.
- W3139258049 hasConceptScore W3139258049C188721877 @default.
- W3139258049 hasConceptScore W3139258049C192562407 @default.
- W3139258049 hasConceptScore W3139258049C198394728 @default.
- W3139258049 hasConceptScore W3139258049C201289731 @default.
- W3139258049 hasConceptScore W3139258049C24890656 @default.
- W3139258049 hasConceptScore W3139258049C2776132848 @default.
- W3139258049 hasConceptScore W3139258049C2776529397 @default.
- W3139258049 hasConceptScore W3139258049C2777755289 @default.
- W3139258049 hasConceptScore W3139258049C2779372316 @default.
- W3139258049 hasConceptScore W3139258049C2780313912 @default.
- W3139258049 hasConceptScore W3139258049C2780581274 @default.
- W3139258049 hasConceptScore W3139258049C57879066 @default.
- W3139258049 hasConceptScore W3139258049C66938386 @default.
- W3139258049 hasConceptScore W3139258049C78519656 @default.
- W3139258049 hasLocation W31392580491 @default.
- W3139258049 hasOpenAccess W3139258049 @default.
- W3139258049 hasPrimaryLocation W31392580491 @default.
- W3139258049 hasRelatedWork W1826521790 @default.
- W3139258049 hasRelatedWork W1992186557 @default.
- W3139258049 hasRelatedWork W2031414017 @default.
- W3139258049 hasRelatedWork W2126962733 @default.
- W3139258049 hasRelatedWork W2143001186 @default.
- W3139258049 hasRelatedWork W2350443348 @default.
- W3139258049 hasRelatedWork W2370046005 @default.
- W3139258049 hasRelatedWork W2383021082 @default.
- W3139258049 hasRelatedWork W2611981192 @default.
- W3139258049 hasRelatedWork W2911379278 @default.
- W3139258049 isParatext "false" @default.
- W3139258049 isRetracted "false" @default.
- W3139258049 magId "3139258049" @default.
- W3139258049 workType "article" @default.