Matches in SemOpenAlex for { <https://semopenalex.org/work/W3190102015> ?p ?o ?g. }
- W3190102015 endingPage "2301" @default.
- W3190102015 startingPage "2289" @default.
- W3190102015 abstract "Creep rupture behaviors of dissimilar metal welds (DMWs) between Inconel 617B and 10%Cr martensitic steel with two different filler metals Inconel 617 and 82 were comparatively investigated at 600 °C to study the effect of nickel-based filler metal types on creep properties. Both the crept DMWs ruptured on the steel side prematurely compared to steel base metal (BM). The failure mode of DMW shifts from interfacial failure at weld metal (WM)/steel interface to Type Ⅳ crack in the intercritical heat-affected zone (ICHAZ) of steel with longer rupture life at the same creep condition by replacing Inconel 617 filler metal with Inconel 82. Type Ⅳ crack was related to matrix softening and fine prior austenite grain boundaries (PAGBs) scarcely decorated by precipitates in the ICHAZ. Interfacial failure was controlled by creep voids nucleation, growth and coalescence at the interface, while oxide notch only triggered crack initiation. The failure mode shift is because Inconel 82 filler metal compared to Inconel 617 can achieve slighter creep deformation concentration in the HAZ closely adjacent to interface and avoid interfacial failure of the DMW due to the lower creep strength gradient across the interface it induced. Based on this study, creep strength compatibility should be considered when selecting nickel-based filler metals for similar DMWs to obtain prolonged creep life." @default.
- W3190102015 created "2021-08-16" @default.
- W3190102015 creator A5004152724 @default.
- W3190102015 creator A5018076995 @default.
- W3190102015 creator A5019847101 @default.
- W3190102015 creator A5023214008 @default.
- W3190102015 creator A5032993492 @default.
- W3190102015 creator A5041010815 @default.
- W3190102015 creator A5053393507 @default.
- W3190102015 creator A5055847877 @default.
- W3190102015 creator A5075014961 @default.
- W3190102015 creator A5079241386 @default.
- W3190102015 date "2021-09-01" @default.
- W3190102015 modified "2023-10-07" @default.
- W3190102015 title "Effect of nickel-based filler metal types on creep properties of dissimilar metal welds between Inconel 617B and 10% Cr martensitic steel" @default.
- W3190102015 cites W1568563022 @default.
- W3190102015 cites W1971044520 @default.
- W3190102015 cites W1980690613 @default.
- W3190102015 cites W1983128553 @default.
- W3190102015 cites W1994031878 @default.
- W3190102015 cites W1997201046 @default.
- W3190102015 cites W2000423169 @default.
- W3190102015 cites W2005728431 @default.
- W3190102015 cites W2008657720 @default.
- W3190102015 cites W2008920144 @default.
- W3190102015 cites W2024551549 @default.
- W3190102015 cites W2035743570 @default.
- W3190102015 cites W2050599964 @default.
- W3190102015 cites W2063070455 @default.
- W3190102015 cites W2071437379 @default.
- W3190102015 cites W2075590170 @default.
- W3190102015 cites W2087646180 @default.
- W3190102015 cites W2095104603 @default.
- W3190102015 cites W2107836133 @default.
- W3190102015 cites W2176377009 @default.
- W3190102015 cites W2530124031 @default.
- W3190102015 cites W2607356024 @default.
- W3190102015 cites W2783963617 @default.
- W3190102015 cites W2792599472 @default.
- W3190102015 cites W2794767515 @default.
- W3190102015 cites W2808757648 @default.
- W3190102015 cites W2883564715 @default.
- W3190102015 cites W2898554269 @default.
- W3190102015 cites W2964301945 @default.
- W3190102015 cites W2996065422 @default.
- W3190102015 cites W3002005296 @default.
- W3190102015 cites W3159826311 @default.
- W3190102015 cites W4232866454 @default.
- W3190102015 cites W4236197955 @default.
- W3190102015 doi "https://doi.org/10.1016/j.jmrt.2021.07.131" @default.
- W3190102015 hasPublicationYear "2021" @default.
- W3190102015 type Work @default.
- W3190102015 sameAs 3190102015 @default.
- W3190102015 citedByCount "5" @default.
- W3190102015 countsByYear W31901020152022 @default.
- W3190102015 countsByYear W31901020152023 @default.
- W3190102015 crossrefType "journal-article" @default.
- W3190102015 hasAuthorship W3190102015A5004152724 @default.
- W3190102015 hasAuthorship W3190102015A5018076995 @default.
- W3190102015 hasAuthorship W3190102015A5019847101 @default.
- W3190102015 hasAuthorship W3190102015A5023214008 @default.
- W3190102015 hasAuthorship W3190102015A5032993492 @default.
- W3190102015 hasAuthorship W3190102015A5041010815 @default.
- W3190102015 hasAuthorship W3190102015A5053393507 @default.
- W3190102015 hasAuthorship W3190102015A5055847877 @default.
- W3190102015 hasAuthorship W3190102015A5075014961 @default.
- W3190102015 hasAuthorship W3190102015A5079241386 @default.
- W3190102015 hasBestOaLocation W31901020151 @default.
- W3190102015 hasConcept C120114934 @default.
- W3190102015 hasConcept C149912024 @default.
- W3190102015 hasConcept C159985019 @default.
- W3190102015 hasConcept C18747287 @default.
- W3190102015 hasConcept C191897082 @default.
- W3190102015 hasConcept C192562407 @default.
- W3190102015 hasConcept C19474535 @default.
- W3190102015 hasConcept C20480867 @default.
- W3190102015 hasConcept C2778703219 @default.
- W3190102015 hasConcept C2780026712 @default.
- W3190102015 hasConcept C87976508 @default.
- W3190102015 hasConceptScore W3190102015C120114934 @default.
- W3190102015 hasConceptScore W3190102015C149912024 @default.
- W3190102015 hasConceptScore W3190102015C159985019 @default.
- W3190102015 hasConceptScore W3190102015C18747287 @default.
- W3190102015 hasConceptScore W3190102015C191897082 @default.
- W3190102015 hasConceptScore W3190102015C192562407 @default.
- W3190102015 hasConceptScore W3190102015C19474535 @default.
- W3190102015 hasConceptScore W3190102015C20480867 @default.
- W3190102015 hasConceptScore W3190102015C2778703219 @default.
- W3190102015 hasConceptScore W3190102015C2780026712 @default.
- W3190102015 hasConceptScore W3190102015C87976508 @default.
- W3190102015 hasLocation W31901020151 @default.
- W3190102015 hasLocation W31901020152 @default.
- W3190102015 hasOpenAccess W3190102015 @default.
- W3190102015 hasPrimaryLocation W31901020151 @default.
- W3190102015 hasRelatedWork W1581108530 @default.
- W3190102015 hasRelatedWork W1932429935 @default.
- W3190102015 hasRelatedWork W1993312801 @default.
- W3190102015 hasRelatedWork W2010122177 @default.