Matches in SemOpenAlex for { <https://semopenalex.org/work/W3190359132> ?p ?o ?g. }
Showing items 1 to 91 of
91
with 100 items per page.
- W3190359132 abstract "The application of coolant in machining operations influences the machining performances such as increase tool life, surface roughness and dimensional accuracy, decrease cutting temperatures and amount of power consumed. Therefore, this paper presents an overview of cryogenic machining and a case study on its application in turning Nickel alloy. This study covers the area of tool life, wear and chip formation under dry and cryogenic conditions. The tool wear was measured under the movable optical microscope with reference to ISO 3685-1993 for VBmax = 0.6 mm. Wear and chip measurement were observed under table top SEM and optical microscope. Results show the increment of tool life for 35%, 53% and 30% of cutting speed 75, 90 and 105 m/min respectively under cryogenic over dry conditions. The dominant wear on the coated carbide is the maximum flank wear which ends up the tool life. Adhesion on the flank face is obviously under a dry condition at speed of 90 and 105 m/min over cryogenic. There was gross fracture appeared under dry at 90 and 105 m/min while the only minor fracture appeared under cryogenic at that level of the parameter. The chip thickness under cryogenic is higher than the dry condition. Shear angle shows a positive correlation to chip thickness where the lower angle obtained under cryogenic while higher angle obtained under dry condition.The pitch of the chip serration is longer under cryogenic over dry at all cutting speeds." @default.
- W3190359132 created "2021-08-16" @default.
- W3190359132 creator A5007503493 @default.
- W3190359132 creator A5012495069 @default.
- W3190359132 creator A5038586506 @default.
- W3190359132 creator A5042244012 @default.
- W3190359132 creator A5065325912 @default.
- W3190359132 date "2018-01-01" @default.
- W3190359132 modified "2023-09-24" @default.
- W3190359132 title "Overview and Case Study of Cryogenic Cooling in Machining of Nickel Based Alloy / N. Badroush ... [et al.]" @default.
- W3190359132 hasPublicationYear "2018" @default.
- W3190359132 type Work @default.
- W3190359132 sameAs 3190359132 @default.
- W3190359132 citedByCount "0" @default.
- W3190359132 crossrefType "journal-article" @default.
- W3190359132 hasAuthorship W3190359132A5007503493 @default.
- W3190359132 hasAuthorship W3190359132A5012495069 @default.
- W3190359132 hasAuthorship W3190359132A5038586506 @default.
- W3190359132 hasAuthorship W3190359132A5042244012 @default.
- W3190359132 hasAuthorship W3190359132A5065325912 @default.
- W3190359132 hasConcept C107365816 @default.
- W3190359132 hasConcept C119599485 @default.
- W3190359132 hasConcept C127413603 @default.
- W3190359132 hasConcept C144024400 @default.
- W3190359132 hasConcept C159985019 @default.
- W3190359132 hasConcept C165005293 @default.
- W3190359132 hasConcept C19165224 @default.
- W3190359132 hasConcept C191897082 @default.
- W3190359132 hasConcept C192562407 @default.
- W3190359132 hasConcept C207055975 @default.
- W3190359132 hasConcept C26771246 @default.
- W3190359132 hasConcept C2776450708 @default.
- W3190359132 hasConcept C2778373014 @default.
- W3190359132 hasConcept C2780026712 @default.
- W3190359132 hasConcept C2780395675 @default.
- W3190359132 hasConcept C43664818 @default.
- W3190359132 hasConcept C523214423 @default.
- W3190359132 hasConcept C77017923 @default.
- W3190359132 hasConcept C78519656 @default.
- W3190359132 hasConcept C79420006 @default.
- W3190359132 hasConcept C87976508 @default.
- W3190359132 hasConcept C91914117 @default.
- W3190359132 hasConceptScore W3190359132C107365816 @default.
- W3190359132 hasConceptScore W3190359132C119599485 @default.
- W3190359132 hasConceptScore W3190359132C127413603 @default.
- W3190359132 hasConceptScore W3190359132C144024400 @default.
- W3190359132 hasConceptScore W3190359132C159985019 @default.
- W3190359132 hasConceptScore W3190359132C165005293 @default.
- W3190359132 hasConceptScore W3190359132C19165224 @default.
- W3190359132 hasConceptScore W3190359132C191897082 @default.
- W3190359132 hasConceptScore W3190359132C192562407 @default.
- W3190359132 hasConceptScore W3190359132C207055975 @default.
- W3190359132 hasConceptScore W3190359132C26771246 @default.
- W3190359132 hasConceptScore W3190359132C2776450708 @default.
- W3190359132 hasConceptScore W3190359132C2778373014 @default.
- W3190359132 hasConceptScore W3190359132C2780026712 @default.
- W3190359132 hasConceptScore W3190359132C2780395675 @default.
- W3190359132 hasConceptScore W3190359132C43664818 @default.
- W3190359132 hasConceptScore W3190359132C523214423 @default.
- W3190359132 hasConceptScore W3190359132C77017923 @default.
- W3190359132 hasConceptScore W3190359132C78519656 @default.
- W3190359132 hasConceptScore W3190359132C79420006 @default.
- W3190359132 hasConceptScore W3190359132C87976508 @default.
- W3190359132 hasConceptScore W3190359132C91914117 @default.
- W3190359132 hasLocation W31903591321 @default.
- W3190359132 hasOpenAccess W3190359132 @default.
- W3190359132 hasPrimaryLocation W31903591321 @default.
- W3190359132 hasRelatedWork W1974595447 @default.
- W3190359132 hasRelatedWork W1994288663 @default.
- W3190359132 hasRelatedWork W2011512986 @default.
- W3190359132 hasRelatedWork W2026252194 @default.
- W3190359132 hasRelatedWork W2055232143 @default.
- W3190359132 hasRelatedWork W2143725124 @default.
- W3190359132 hasRelatedWork W2169109308 @default.
- W3190359132 hasRelatedWork W2297985887 @default.
- W3190359132 hasRelatedWork W2508445562 @default.
- W3190359132 hasRelatedWork W2517451280 @default.
- W3190359132 hasRelatedWork W2578397009 @default.
- W3190359132 hasRelatedWork W2901452212 @default.
- W3190359132 hasRelatedWork W2904969041 @default.
- W3190359132 hasRelatedWork W2906399782 @default.
- W3190359132 hasRelatedWork W2939943956 @default.
- W3190359132 hasRelatedWork W2953728601 @default.
- W3190359132 hasRelatedWork W3037819657 @default.
- W3190359132 hasRelatedWork W3161885373 @default.
- W3190359132 hasRelatedWork W3200457959 @default.
- W3190359132 hasRelatedWork W965119521 @default.
- W3190359132 isParatext "false" @default.
- W3190359132 isRetracted "false" @default.
- W3190359132 magId "3190359132" @default.
- W3190359132 workType "article" @default.