Matches in SemOpenAlex for { <https://semopenalex.org/work/W4387675507> ?p ?o ?g. }
Showing items 1 to 91 of
91
with 100 items per page.
- W4387675507 endingPage "145803" @default.
- W4387675507 startingPage "145803" @default.
- W4387675507 abstract "The successful manufacture of crack-free and highly dense H13 tool steel using laser powder bed fusion (LPBF) has been widely reported. Although the phases contain only martensite and some (<20 %) of residual austenite (RA), the differences in tensile properties are very large in previous studies. Here, the microstructure and tensile properties of the LPBF-fabricated H13 steels with different heat treatments were comparatively studied. Tensile strengths ranged ∼2.0–2.2 GPa for the optimal as-built and direct-tempered samples. By increasing the heat input, the RA content was reduced to 0.1 % and the microstructure contained only hierarchically fine martensite with improved tensile properties and anisotropy. Based on the full-martensitic microstructure in the optimal as-built samples, secondary hardening was achieved by direct tempering at 530–590 °C with tensile strengths of ∼2.1–2.2 GPa and improved elongations (4.93–6.43 %). The optimal direct-tempered samples yielded higher tensile strengths compared to the standard heat-treated counterparts. For the direct-tempered samples, the substantial retaining of the fine martensitic structure and high density of dislocations introduced by LPBF was the key to the excellent properties rather than the precipitates. This work elucidated the effect of the LPBF process, direct tempering, and standard heat treatment on the tensile property of H13 steel. It is concluded that process optimization for LPBF fabrication of H13 steel requires not only defect avoidance but also fine martensite and low-content RA. On this base, the LPBF-prepared H13 steel can be directly tempered to further obtain components with excellent tensile properties, which are superior to the standard heat-treated counterparts." @default.
- W4387675507 created "2023-10-17" @default.
- W4387675507 creator A5013711745 @default.
- W4387675507 creator A5027681465 @default.
- W4387675507 creator A5038497484 @default.
- W4387675507 creator A5057792399 @default.
- W4387675507 creator A5059187796 @default.
- W4387675507 date "2023-10-01" @default.
- W4387675507 modified "2023-10-17" @default.
- W4387675507 title "2 GPa H13 steels fabricated by laser powder bed fusion and tempering: Microstructure, tensile property and strengthening mechanism" @default.
- W4387675507 cites W1035917904 @default.
- W4387675507 cites W1963620933 @default.
- W4387675507 cites W1970264806 @default.
- W4387675507 cites W2004220520 @default.
- W4387675507 cites W2520771015 @default.
- W4387675507 cites W2565869990 @default.
- W4387675507 cites W2580640828 @default.
- W4387675507 cites W2789652227 @default.
- W4387675507 cites W2793869208 @default.
- W4387675507 cites W2886868493 @default.
- W4387675507 cites W2899445784 @default.
- W4387675507 cites W2913265289 @default.
- W4387675507 cites W2921810834 @default.
- W4387675507 cites W2959345941 @default.
- W4387675507 cites W2995857930 @default.
- W4387675507 cites W3021441282 @default.
- W4387675507 cites W3035340953 @default.
- W4387675507 cites W3036099640 @default.
- W4387675507 cites W3048141820 @default.
- W4387675507 cites W3129465575 @default.
- W4387675507 cites W3139357117 @default.
- W4387675507 cites W3202868788 @default.
- W4387675507 cites W3207868556 @default.
- W4387675507 cites W4200081185 @default.
- W4387675507 cites W4200574208 @default.
- W4387675507 cites W4220961466 @default.
- W4387675507 cites W4298148435 @default.
- W4387675507 cites W4302287613 @default.
- W4387675507 cites W4309566293 @default.
- W4387675507 cites W4309628869 @default.
- W4387675507 cites W4319786450 @default.
- W4387675507 cites W4362472250 @default.
- W4387675507 cites W4384937990 @default.
- W4387675507 doi "https://doi.org/10.1016/j.msea.2023.145803" @default.
- W4387675507 hasPublicationYear "2023" @default.
- W4387675507 type Work @default.
- W4387675507 citedByCount "0" @default.
- W4387675507 crossrefType "journal-article" @default.
- W4387675507 hasAuthorship W4387675507A5013711745 @default.
- W4387675507 hasAuthorship W4387675507A5027681465 @default.
- W4387675507 hasAuthorship W4387675507A5038497484 @default.
- W4387675507 hasAuthorship W4387675507A5057792399 @default.
- W4387675507 hasAuthorship W4387675507A5059187796 @default.
- W4387675507 hasConcept C112950240 @default.
- W4387675507 hasConcept C159985019 @default.
- W4387675507 hasConcept C18747287 @default.
- W4387675507 hasConcept C191897082 @default.
- W4387675507 hasConcept C192562407 @default.
- W4387675507 hasConcept C207948433 @default.
- W4387675507 hasConcept C2776001022 @default.
- W4387675507 hasConcept C2776704300 @default.
- W4387675507 hasConcept C87976508 @default.
- W4387675507 hasConcept C96288455 @default.
- W4387675507 hasConceptScore W4387675507C112950240 @default.
- W4387675507 hasConceptScore W4387675507C159985019 @default.
- W4387675507 hasConceptScore W4387675507C18747287 @default.
- W4387675507 hasConceptScore W4387675507C191897082 @default.
- W4387675507 hasConceptScore W4387675507C192562407 @default.
- W4387675507 hasConceptScore W4387675507C207948433 @default.
- W4387675507 hasConceptScore W4387675507C2776001022 @default.
- W4387675507 hasConceptScore W4387675507C2776704300 @default.
- W4387675507 hasConceptScore W4387675507C87976508 @default.
- W4387675507 hasConceptScore W4387675507C96288455 @default.
- W4387675507 hasLocation W43876755071 @default.
- W4387675507 hasOpenAccess W4387675507 @default.
- W4387675507 hasPrimaryLocation W43876755071 @default.
- W4387675507 hasRelatedWork W1499987734 @default.
- W4387675507 hasRelatedWork W1816260496 @default.
- W4387675507 hasRelatedWork W2061393887 @default.
- W4387675507 hasRelatedWork W2069903158 @default.
- W4387675507 hasRelatedWork W2152445038 @default.
- W4387675507 hasRelatedWork W2255033110 @default.
- W4387675507 hasRelatedWork W2296380465 @default.
- W4387675507 hasRelatedWork W2974667582 @default.
- W4387675507 hasRelatedWork W306146720 @default.
- W4387675507 hasRelatedWork W4280603026 @default.
- W4387675507 isParatext "false" @default.
- W4387675507 isRetracted "false" @default.
- W4387675507 workType "article" @default.