Matches in SemOpenAlex for { <https://semopenalex.org/work/W601980651> ?p ?o ?g. }
Showing items 1 to 73 of
73
with 100 items per page.
- W601980651 abstract "Milling of an asphalt concrete (AC) pavement surface refers to the mechanical removal of a part of the pavement surface. The Kansas Department of Transportation (KDOT) and the Kansas Turnpike Authority (KTA) routinely mill some AC pavements before inlaying. KTA selects the milling depth based on engineering judgement. On some major projects where deep milling is involved, KDOT currently selects a mill-and-inlay depth so that the ratio of this depth to the remaining milled pavement thickness would be higher than 1.0. This somewhat insures that much of the full pavement thickness would consist of newer materials. These practices of KDOT and KTA were analyzed in a recent study and the findings are reported in this paper. Nine mill-and-inlaid pavement sections, selected on six different routes in Kansas, were studied. Falling Weight Deflectometer (FWD) tests were done on those sections at 15 or 30-m intervals before milling, after milling, and after inlaying. Laboratory fatigue tests were also done on the AC beams sawn from four test sections. The results show that in order to achieve higher fatigue life, the mill-and-inlay thickness should be at least 1.25 times the thickness of the remaining milled pavement layer. Based on the mechanistic-empirical analysis procedure, it was found that the mill-and-inlaid pavement fatigue life also does not linearly increase with the inlay thickness." @default.
- W601980651 created "2016-06-24" @default.
- W601980651 creator A5030368599 @default.
- W601980651 creator A5047268582 @default.
- W601980651 creator A5064766336 @default.
- W601980651 date "2000-01-01" @default.
- W601980651 modified "2023-09-23" @default.
- W601980651 title "SELECTION OF MILLING DEPTH FOR ASPHALT PAVEMENT REHABILITATION" @default.
- W601980651 cites W1480840718 @default.
- W601980651 cites W608033375 @default.
- W601980651 hasPublicationYear "2000" @default.
- W601980651 type Work @default.
- W601980651 sameAs 601980651 @default.
- W601980651 citedByCount "0" @default.
- W601980651 crossrefType "journal-article" @default.
- W601980651 hasAuthorship W601980651A5030368599 @default.
- W601980651 hasAuthorship W601980651A5047268582 @default.
- W601980651 hasAuthorship W601980651A5064766336 @default.
- W601980651 hasConcept C127413603 @default.
- W601980651 hasConcept C159985019 @default.
- W601980651 hasConcept C16057445 @default.
- W601980651 hasConcept C168056786 @default.
- W601980651 hasConcept C187320778 @default.
- W601980651 hasConcept C190719290 @default.
- W601980651 hasConcept C191897082 @default.
- W601980651 hasConcept C192562407 @default.
- W601980651 hasConcept C2780656047 @default.
- W601980651 hasConcept C2780952559 @default.
- W601980651 hasConcept C2986189917 @default.
- W601980651 hasConcept C40084718 @default.
- W601980651 hasConcept C77595967 @default.
- W601980651 hasConcept C78519656 @default.
- W601980651 hasConceptScore W601980651C127413603 @default.
- W601980651 hasConceptScore W601980651C159985019 @default.
- W601980651 hasConceptScore W601980651C16057445 @default.
- W601980651 hasConceptScore W601980651C168056786 @default.
- W601980651 hasConceptScore W601980651C187320778 @default.
- W601980651 hasConceptScore W601980651C190719290 @default.
- W601980651 hasConceptScore W601980651C191897082 @default.
- W601980651 hasConceptScore W601980651C192562407 @default.
- W601980651 hasConceptScore W601980651C2780656047 @default.
- W601980651 hasConceptScore W601980651C2780952559 @default.
- W601980651 hasConceptScore W601980651C2986189917 @default.
- W601980651 hasConceptScore W601980651C40084718 @default.
- W601980651 hasConceptScore W601980651C77595967 @default.
- W601980651 hasConceptScore W601980651C78519656 @default.
- W601980651 hasLocation W6019806511 @default.
- W601980651 hasOpenAccess W601980651 @default.
- W601980651 hasPrimaryLocation W6019806511 @default.
- W601980651 hasRelatedWork W1537925678 @default.
- W601980651 hasRelatedWork W1992619140 @default.
- W601980651 hasRelatedWork W2152911940 @default.
- W601980651 hasRelatedWork W2155873818 @default.
- W601980651 hasRelatedWork W2326534094 @default.
- W601980651 hasRelatedWork W2596512393 @default.
- W601980651 hasRelatedWork W3026538301 @default.
- W601980651 hasRelatedWork W34821423 @default.
- W601980651 hasRelatedWork W593836243 @default.
- W601980651 hasRelatedWork W593911242 @default.
- W601980651 hasRelatedWork W606140452 @default.
- W601980651 hasRelatedWork W609339988 @default.
- W601980651 hasRelatedWork W636987376 @default.
- W601980651 hasRelatedWork W644548678 @default.
- W601980651 hasRelatedWork W658042551 @default.
- W601980651 hasRelatedWork W798064626 @default.
- W601980651 hasRelatedWork W818658433 @default.
- W601980651 hasRelatedWork W830153377 @default.
- W601980651 hasRelatedWork W839886397 @default.
- W601980651 hasRelatedWork W853602067 @default.
- W601980651 isParatext "false" @default.
- W601980651 isRetracted "false" @default.
- W601980651 magId "601980651" @default.
- W601980651 workType "article" @default.