Matches in SemOpenAlex for { <https://semopenalex.org/work/W818658433> ?p ?o ?g. }
Showing items 1 to 78 of
78
with 100 items per page.
- W818658433 abstract "The milling of asphalt concrete (AC) pavement surface refers to the mechanical removal of a part of the pavement surface. The Kansas Department of Transportation (KDOT) and the Kansas Turnpike Authority (KTA) routinely mill the surfaces of some AC pavements before inlaying. KTA has adopted a strategy of recycling the upper pavement layer on a relatively frequent basis (every six or seven years) to maintain a smooth riding surface for the last decade or so. However, in most cases, the milling depth is selected based on the rule-of-thumb or experience of the agency for a specific surface distress, such as rutting or transverse cracking, rather than based on any engineering analysis. In this report, the structural and functional performances of such mill-and-inlay AC pavements were analyzed for six different routes of KDOT and KTA. All test sections were tested with the Falling Weight Deflectometer at 50 to 100 ft intervals before milling, after milling, and after inlaying. Ten 6-in. wide, 18-in. long, full-depth AC beams were sawn from four test sections. Fatigue tests were conducted in a third-point flexural loading fashion on those field beams sawn into fatigue test specimens of size: 4-in. wide, 3-in. deep and 16-in. long. Distress models and rational transfer factors were found through the analysis of fatigue test results, deflection data, and historical traffic data to estimate the fatigue damage, functional performance, and rutting susceptibility of the mill-and-inlay pavements. For high traffic pavements, an optimal mill-and-inlay depth based on fatigue can be found. Mill-and-inlay strategy may reduce fatigue life of pavements with low traffic volumes. Cost-effectiveness of the mill-and-inlay strategy is higher for pavements with higher traffic. The strategy did not appear to be susceptible to rutting nor did it appear to cause damage to the existing pavement layers." @default.
- W818658433 created "2016-06-24" @default.
- W818658433 creator A5030368599 @default.
- W818658433 creator A5053295608 @default.
- W818658433 date "2002-01-01" @default.
- W818658433 modified "2023-09-27" @default.
- W818658433 title "Estimation of Asphalt Pavement Life" @default.
- W818658433 cites W1480840718 @default.
- W818658433 cites W2581519552 @default.
- W818658433 cites W2587202222 @default.
- W818658433 cites W573447687 @default.
- W818658433 cites W608033375 @default.
- W818658433 hasPublicationYear "2002" @default.
- W818658433 type Work @default.
- W818658433 sameAs 818658433 @default.
- W818658433 citedByCount "1" @default.
- W818658433 crossrefType "journal-article" @default.
- W818658433 hasAuthorship W818658433A5030368599 @default.
- W818658433 hasAuthorship W818658433A5053295608 @default.
- W818658433 hasConcept C120665830 @default.
- W818658433 hasConcept C121332964 @default.
- W818658433 hasConcept C127413603 @default.
- W818658433 hasConcept C159985019 @default.
- W818658433 hasConcept C168056786 @default.
- W818658433 hasConcept C187320778 @default.
- W818658433 hasConcept C192562407 @default.
- W818658433 hasConcept C2778713851 @default.
- W818658433 hasConcept C2780656047 @default.
- W818658433 hasConcept C2781355719 @default.
- W818658433 hasConcept C3020080851 @default.
- W818658433 hasConcept C40084718 @default.
- W818658433 hasConcept C58396970 @default.
- W818658433 hasConcept C66938386 @default.
- W818658433 hasConcept C76893819 @default.
- W818658433 hasConcept C77595967 @default.
- W818658433 hasConceptScore W818658433C120665830 @default.
- W818658433 hasConceptScore W818658433C121332964 @default.
- W818658433 hasConceptScore W818658433C127413603 @default.
- W818658433 hasConceptScore W818658433C159985019 @default.
- W818658433 hasConceptScore W818658433C168056786 @default.
- W818658433 hasConceptScore W818658433C187320778 @default.
- W818658433 hasConceptScore W818658433C192562407 @default.
- W818658433 hasConceptScore W818658433C2778713851 @default.
- W818658433 hasConceptScore W818658433C2780656047 @default.
- W818658433 hasConceptScore W818658433C2781355719 @default.
- W818658433 hasConceptScore W818658433C3020080851 @default.
- W818658433 hasConceptScore W818658433C40084718 @default.
- W818658433 hasConceptScore W818658433C58396970 @default.
- W818658433 hasConceptScore W818658433C66938386 @default.
- W818658433 hasConceptScore W818658433C76893819 @default.
- W818658433 hasConceptScore W818658433C77595967 @default.
- W818658433 hasLocation W8186584331 @default.
- W818658433 hasOpenAccess W818658433 @default.
- W818658433 hasPrimaryLocation W8186584331 @default.
- W818658433 hasRelatedWork W1537925678 @default.
- W818658433 hasRelatedWork W1997231961 @default.
- W818658433 hasRelatedWork W2033278314 @default.
- W818658433 hasRelatedWork W2076226070 @default.
- W818658433 hasRelatedWork W2099525490 @default.
- W818658433 hasRelatedWork W2150266852 @default.
- W818658433 hasRelatedWork W2155873818 @default.
- W818658433 hasRelatedWork W2242285425 @default.
- W818658433 hasRelatedWork W2410802158 @default.
- W818658433 hasRelatedWork W34821423 @default.
- W818658433 hasRelatedWork W566332958 @default.
- W818658433 hasRelatedWork W568078745 @default.
- W818658433 hasRelatedWork W593836243 @default.
- W818658433 hasRelatedWork W593911242 @default.
- W818658433 hasRelatedWork W601980651 @default.
- W818658433 hasRelatedWork W606140452 @default.
- W818658433 hasRelatedWork W609339988 @default.
- W818658433 hasRelatedWork W652138172 @default.
- W818658433 hasRelatedWork W783748803 @default.
- W818658433 hasRelatedWork W929906261 @default.
- W818658433 isParatext "false" @default.
- W818658433 isRetracted "false" @default.
- W818658433 magId "818658433" @default.
- W818658433 workType "article" @default.