Matches in SemOpenAlex for { <https://semopenalex.org/work/W97400354> ?p ?o ?g. }
Showing items 1 to 69 of
69
with 100 items per page.
- W97400354 abstract "Finite element evaluation is one of the methods in predicting the springback angle in sheet metal bending. Predicting the springback is important since to produce the accuracy part geometry, the design of the die and bending tool must be accurate. This thesis aims to evaluate the reliability of finite element method by comparing the results with experimental results. The effect of parameters such as anisotropy in springback also has been studied. Abaqus software has been used to simulate the bending process and the mechanical properties provided from tensile test will be used to run the simulation. In the U-bending experiment, the die were clamped on stamping machine and the Mild Steel sheets then have been bent before the springback being measured with SolidWorks software. The results from the experiment and simulation is slightly different for the springback angle Ɵ1 , which the simulation shows increasing the orientation will increase the springback, and for the experimental, the springback higher at 0 degree orientation angle, and lower at 45 degree. For the springback angle Ɵ2 , the simulation and experimental result show that increasing the orientation angle will increase the amount of springback. Finite element method can be used to predict the springback since the pattern of the graphs are nearly the same and percentages of error are below 10 %. It can be comprehended that the finite element method are suitable method to predict the springback angle of sheet metal bending. The further study on parameters that effected bending process will make the finite element method is important in the future." @default.
- W97400354 created "2016-06-24" @default.
- W97400354 creator A5005659844 @default.
- W97400354 date "2012-06-01" @default.
- W97400354 modified "2023-09-26" @default.
- W97400354 title "Experimental and finite element evaluation of bending for mild steel" @default.
- W97400354 hasPublicationYear "2012" @default.
- W97400354 type Work @default.
- W97400354 sameAs 97400354 @default.
- W97400354 citedByCount "0" @default.
- W97400354 crossrefType "journal-article" @default.
- W97400354 hasAuthorship W97400354A5005659844 @default.
- W97400354 hasConcept C111106434 @default.
- W97400354 hasConcept C111919701 @default.
- W97400354 hasConcept C127413603 @default.
- W97400354 hasConcept C135628077 @default.
- W97400354 hasConcept C138211643 @default.
- W97400354 hasConcept C16345878 @default.
- W97400354 hasConcept C192562407 @default.
- W97400354 hasConcept C2524010 @default.
- W97400354 hasConcept C2779747408 @default.
- W97400354 hasConcept C33923547 @default.
- W97400354 hasConcept C41008148 @default.
- W97400354 hasConcept C66938386 @default.
- W97400354 hasConcept C78519656 @default.
- W97400354 hasConcept C87210426 @default.
- W97400354 hasConcept C98045186 @default.
- W97400354 hasConceptScore W97400354C111106434 @default.
- W97400354 hasConceptScore W97400354C111919701 @default.
- W97400354 hasConceptScore W97400354C127413603 @default.
- W97400354 hasConceptScore W97400354C135628077 @default.
- W97400354 hasConceptScore W97400354C138211643 @default.
- W97400354 hasConceptScore W97400354C16345878 @default.
- W97400354 hasConceptScore W97400354C192562407 @default.
- W97400354 hasConceptScore W97400354C2524010 @default.
- W97400354 hasConceptScore W97400354C2779747408 @default.
- W97400354 hasConceptScore W97400354C33923547 @default.
- W97400354 hasConceptScore W97400354C41008148 @default.
- W97400354 hasConceptScore W97400354C66938386 @default.
- W97400354 hasConceptScore W97400354C78519656 @default.
- W97400354 hasConceptScore W97400354C87210426 @default.
- W97400354 hasConceptScore W97400354C98045186 @default.
- W97400354 hasLocation W974003541 @default.
- W97400354 hasOpenAccess W97400354 @default.
- W97400354 hasPrimaryLocation W974003541 @default.
- W97400354 hasRelatedWork W1491872646 @default.
- W97400354 hasRelatedWork W1589693977 @default.
- W97400354 hasRelatedWork W1971460833 @default.
- W97400354 hasRelatedWork W1973444906 @default.
- W97400354 hasRelatedWork W2001231955 @default.
- W97400354 hasRelatedWork W2043508957 @default.
- W97400354 hasRelatedWork W2053627595 @default.
- W97400354 hasRelatedWork W2055964086 @default.
- W97400354 hasRelatedWork W2122570426 @default.
- W97400354 hasRelatedWork W2184530628 @default.
- W97400354 hasRelatedWork W2726733386 @default.
- W97400354 hasRelatedWork W2735933163 @default.
- W97400354 hasRelatedWork W2772335960 @default.
- W97400354 hasRelatedWork W2792174607 @default.
- W97400354 hasRelatedWork W2946059761 @default.
- W97400354 hasRelatedWork W2956061446 @default.
- W97400354 hasRelatedWork W2981036998 @default.
- W97400354 hasRelatedWork W3144242028 @default.
- W97400354 hasRelatedWork W2188902387 @default.
- W97400354 hasRelatedWork W3001528680 @default.
- W97400354 isParatext "false" @default.
- W97400354 isRetracted "false" @default.
- W97400354 magId "97400354" @default.
- W97400354 workType "article" @default.